Viewing all customer Discussions for:

18-188 5/8" Top Sash Guide

Metal channel is 32 5/8 long Stamp says 32-5 Milgard...likely in 2004 (when the home was built) 16 balances (8 windows...all the same size) I weighed one of the windows...they should be all the same: 27 pounds

I ordered the balances from you and they worked great! I now need the window sash guides as they are either broken or missing. Not sure if I need the 5/8" Top Sash Guide Product Code: 18-188. Can you please verify and send me a quote for (6) of them. Thank you!

Spring balance for single hung vinyl window. The it is 1/2" wide and stamped 25 4. I also need 2 plastic sash guides

There are no markings on the part or the window They are non tilt windows and I believe block and tackle balance It looks as though the upper clips are also missing

This part is on our window. I need to replace the other side which is broken

I am looking for this sash cam for the balancer. is there a way to know what sash cam is compatible with a specific balancer? Thank you!

Custom balance

Hi Were looking for these clips. They are installed with window balances. Can you help ID?

I measure 31 5/8" Stamp - 31 5 Milgard Window I would need a total of 6 balances

good day. snapped the spring string part of one side of my non-tilt window. Im lost on the replacement need. not so much the measurement part... 26 4, but with the rest, LW CMC 11. Ive seen IW, GW, AX... but have no idea what that means. Cant seem to find any LW CMC 11. I've confirmed the balance i ... (cont.)

Hi all -Please find photos attached for some broken channel balances I'd like to replace. I measured the length of the metal case of the balance at 33". (despite the designation "32 5 KQ Caldwell").Do you have replacements for these?Thank youNeil

Just received my order and thank you, but when I tried the Top Sash Guide 18-188, I learned that I mis measured. At the time of ordering this one appeared to be closest to what I have. After taking off the still good old sash and measuring I found that your inventory does not have the exact measu ... (cont.)

Not sure which one on your site matches. I need at least 10 of them One pic shows a broken item. The other appears intact.

Hello, I need help identifying the part circled in yellow in the attached picture. I have windows that slide up and down.

Hi Support, I need help to purchase window top sash guide, the one I need was not available from Swisco website, please see attached drawing? Thank you

I believe it's a window balance stop. It is attached to the top of my Millard window. It is the piece that engages the new balances I bought from SWISCO.

hello, I am inquiring about this product i would like some information please, i will need 6 to 8 of these and would like to know a rough estimate on lead times and costing and see if its affordable. i can get pictures to you later today or when you reply. but i have found this on your thread and th ... (cont.)

The channel length is 26.5" long. 1/2" wide and 5/8" deep. The stamp printed on it is 26 4, The window was manufactured by Milgard and probably made in 2005 (that's when the house was built). The window is 34" wide by 57.5" tall. The lower window is 29" tall. I don't know the weight, but I'll guess ... (cont.)

Have 9 windows that have the counterbalance bars extended in the frame. It appears that this happens when the plastic piece at the top corner of the window frame gets brittle and breaks. I saw no 4 digit stamp on them the counterbalance. The stamp on it says 29-3 CA2 CAM. So I need the replacement ... (cont.)

Please help me identify this piece which broke on several windows.