Viewing all customer Discussions for:

26-417 Weep Hole Cover, 1" x 3/8"

Just moved into house in Delray Beach FL. Some covers are missing a pack of 10 would be great if possible

We have an older house from 1976 and some of the weephole are completely destroyed. Trying to find a replacement. I measured both the hole opening and the weep hole pieces. Alenco aluminum windows Code 50-1 hp series window Window weep hole opening 3/16 height And 1 and 5/16 across Weep hole pie ... (cont.)

Window Sash Vent Weep House is from 1994. I'm not sure what brand window but some of the window lock parts is for Pacific Industries. I would need (10) pieces for the vents

I have a home that has windows with the name Pacific Window Corporation on them. On the outside of the window, at the bottom, there is a small plastic piece that is missing on several windows. The piece is approximatley 1 inch wide by 1/2 inch tall. I need to replace them if you have them. Photo ... (cont.)

See pictures below of the opening size and existing flaps; Thanks

Hi I have lost several of these small parts. They are 1"x1/4" and slip into the rectangle holes on window. There is a flap that allows air/water out but not in.

I am looking for a small interior weep hole vent.The cutout in the sill is approximately 5/16" x 15/16".Do you have anything like this?Thanks,Larry

I need to replace a weep hole cover in a PGT window (PW5420) in bronze color. Do you sell this part?

I am looking for a weep hole cover that will fit the weep hole in the photo. the opening measures approximately 1 inch but is slightly tapered. Unfortunately, contractors working on my house broke several of the existing weep holes.

These are on my solarium from 1997. 1.5 inch wide and .5 inch tall. The one picture shows the weep hole and mounting hole.

I am looking for weep hole covers for pgt window opening of 1". Existing weep cover measures prongs 1" apart, overall measurement 1 3/8". See photos

these little trap doors are a little under 1 3/8" wide. the clips that go into the slot of the window are 1" wide.

I am trying to replace weep hole plus for a large picture type window. I have included a photo of the plugs. Do you have these? The windows are labeled MW HM 2005. Thank you Laura

I am in need of replacing 8 weep covers. Are you able to help me?

the old cover's locking tabs are 1/8" thick yours is 3/16"

LOOKING FOR REPLACEMENT PARTS FOR OUTSIDE FRAME PARTS PLASTIC APPROXIMATELY 1" THREE PER WINDOW AT BOTTOM OF ALUMINUM FRAME ALLOW FOR WATER TO DRAIN OUT OF WINDOW FRAME APPROXIMATELY 1/4" WIDE

I am trying to find replacement parts for our Summit Windows originally installed in our home in 2000 - Weephole covers and Screen holders - windows have etching 10/10 - 8MI on them.

PGT Weep Hole cover Window is located in Boca Raton Florida Need 6 pc

Can you provide with a replacement that matches the images above.

Hi I need 35 drain covers for BFRICH windows . The hole in window is 1 inch wide by 3/8 high they have a flap which lets water out of sill area.