Viewing all customer Discussions for:

33-103 Phillips Flat 10-32 x 1/2" SS Machine Screw

It fits inside a bracket that is in patio door still. The bracket is brass too and has a thread bolt keeping it in place and I can't remove the carriage. This part is about .75" thick let me know what else you need from me. and thank you

So far what i have found to be pretty close is Product code 81-004. The only difference is wheel diameter. i need 1 1/4"

Is there a replacement for this or something i can make work? length 3 1/4 width 3/4 height 1 3/8 Wheel 1'

Liking to replace rollers on a sliding patio doors. What would be the correct rollers for this application? Thank you.

looking for help with these

Production Enterprises hialeah FL

steel wheel is 1.5" Outside casing is 2.5" long Max width is 3/4 (where the metal is beveledoutward)

Looking for a replacement

Hello, I am looking to order a replacement for this patio door roller. The diameter of the wheel looks to be 1-1/4". I'd appreciate any help you could give me. Thanks!

Can you match or substitute the rollers pictured?

5/8 inch wide. 1inch tall and 3 and 7/8 inches long.

These rollers are off a set of fur wood sliding door from the 70's. They are in perfect shape except for the rollers. No marking or part numbers. Roller is exactly 3 inches in length. Width of 0.5 inches and roller diameter of 1 1/8 inches. Rollers insert into an aluminum rail

Original roller with 3 rivets needed as replacement 7/16" width rollers (M.F.S.) to not fit as the arm on one side makes it 1/2" width which is too tight

We have unique rollers here for the screen door portion of what I believe are Kawneer doors. I could be wrong. To note, they screw in from the top as well. So I have to remove the rail of the door to get to that screw. Any help finding replacement parts would be greatly appreciated. ... (cont.)

Width 3/4 in Height 1 1/4 in Length 3 in Wheel Width 1/4 in Can't find a similair style or replacement style that is similar - any help would be appreciated! Pretty old I think. Sliding glass patio door in a house we manage - maintenance cannot find a replacement for it.

Patio door brand not available. Sliders have multiple small cylindrical rollers.

Hi, I removed these rollers from my daughter's very heavy glass patio door. I spent 2 days and many hours trying to find the entire bracket units. I even tried finding just the rollers themselves since I had the brackets intact. No success. I had to put them back on the door & reinstall door ... (cont.)

Roller

Need replacement part (s) for this roller assembly. Roller is 1 1/4 inches. Thanks for your help..

Need to identify and purchase two single rollers for my sliding glass door. The dimensions and diameter of the wheel is 2 3/8' L x 1 3/16' high and 9/16" Wide as shown on uploaded picture with a 1 1/8" wheel diameter. PLease advise.