Viewing all customer Discussions for:

33-103 Phillips Flat 10-32 x 1/2" SS Machine Screw

2 each: Roller hardware 5/8 wide 2 inch long 1 3/4 tall with 2 inch roller wheel.

I need help to figure out what wheels I need for my sliding glass door. They have broke off.

For a screen door adjustment. Thanks

This aluminum sliding door has no name printed on it but has a nice wood handle on the interior. The roller housing is enclosed in the bottom rail that accomodates up to a 3/4" wide roller. Because the roller assembly contains some rust because of previous water damage my measurements are best estim ... (cont.)

Several days ago we called about roller replacements. Here are the photos of the rollers.The first photo shows the lower frame which supports the glass and holds the rollers with a screw securing the roller assembly to the frame.The second photo shows the approximate dimensions of the roller assembl ... (cont.)

I need a roller and housing for my sliding glass door. I saw another person with the same roller as mine from a 2013 post on here. I hope you can find one for me. I hate to scrap out a perfectly good door just because I can't find the roller. Unlike the 2013 post, the measurement on the housing is n ... (cont.)

Outer stamped metal is 1 3/4" tall, 1 15/16" long, notch at bottom is 1/16". Inner stamped metal is 1 11/16" tall, 2 1/16" long. Outer bracket is 3/4" wide before it slims down to squeeze inner bracket. Inner bracket is 1/2" wide. Wheel is 1 1/4" diameter.

No identifying letters or numbers on the roller.

though the wheels work relatively well when I clean them and reinstall, they get stuck as soon as I put the door back on the rails b/c the wheels are not secure and therefore the height is lowered. I believe that this is due to the cavity on the bottom door frame (seen on top of the glass in the pi ... (cont.)

What are the part numbers for the mounting AND adjusting screws needed for the 81-095 roller assembly?Respectfully, Tracy

Looking for replacement roller assembly for older trimview sliding glass doorRoller Only, 1-1/2 Diameter Steel Wheel 1/2" wide 1/4" hole

I'm looking for a replacement sliding glass door roller pulled from an unbranded door Engraved "MBC 1116"

I need an entire roller for a sliding glass good. It's an older door and am not able to find parts locally . I need two in order to balance the sliding glass door

Looking to replace the roller assemblies for my patio sliding door, aluminum door.I do not know the brand of the door nor model number.I already sent a separate request under your Contact Us.Thank you,John

Any idea? Thanks

I am looking to replace two rollers on a large mirrored sliding door. The manufacturer was Buchmin Industries which I understand is no longer in business. The groove of the nylon roller is 5/16". Diameter of the roller is about 1/14" Length of housing assembly is 1 7/8' Height is 1 1/4". ... (cont.)

Hello, please help us identify this roller and if you have it available for sale

Hi There, I'm trying to find replacement rollers for a sliding door. The only description I can give you about the door is, it is original to the house that was built in 1986. It is aluminum. The dimensions are as follows, length 2-1/4", width 1-5/16th", Thickness 7/16ths" and the roller diameter is ... (cont.)

Hi,I'm trying to find a set of replacement rollers referenced in the subject line. The house was built in 1957, and the doors may be original to that year. They are just a friction fit in each end of the frame with a height adjustment screw positiooned vertically from the bottom.I've attached a few ... (cont.)

11/16 wide by 1 inch tall by 4 1/4 long. Wheel is 17/16, or 1 inch plus a 1/16th. The hole on top is 1 1/2 inch in center of hole to end. There are no numbers or markings.