Viewing all customer Discussions for:

33-104 Phillips 1/4-20 x 3/4" SS Machine Screw

Looking for a PE Del Mar single roller, not sure part number, to fix my sliding door. Jarmin

Do You sell the attachment screws to attach a Disco 1165 to the roller mechanism to the bottom rail of a Howard Industries Series T 30 sliding glass door? M5 0.8 x 20mm 966 phillips drive oval head grade A2 stainless steel machine screw from Fastenal does not fit the threads correctly. Can you provi ... (cont.)

Likit Hayward, CA Door Pat #3.106.753 We are looking for replacement rollers. There are two gray plastic rollers under the heavy glass door, one which broke. Can you please identify the best replacement roller for this type of door? Thank you so much!

Photo #3 of only labeling found on the door I believe it pertains more to the glass

I️ am looking for 2 roller assemblies like the pictures. 1 1/8 inch diameter roller. Removed from a 20 year old custom made sliding storm door (Ray door). No markings or numbers. 11/16 inch wide. Must have a fastener hole on the top and outside end. Myron

I am looking for replacement rollers for my sliding glass doors. The wheel is 1-1/2" diameter, and the width is 3/4". The frame screw is 1/4:20, and the adjuster screw is 10:32. I have attached a picture of the type I am looking for. Do you have this, and if so, what is the price? ... (cont.)

Can you halp me locate a replacement for this patio door roller?

Letters on top of the roller: ASTR BEC OMCO. I didn't realize roller sizes would vary so didn't measure them while the assembly was out. The background of the images is 1/4" graph paper if that helps.

this is from a 59 year old peachtree door but don't see one like it.

My part pictured is from a door of unknown brand. Says Production Enterprises on it. I think it's your #81-004, seems to match the measurements.

The assembly is stamped Production Enterprises. Hialeah FLI measure the unit as 11/16 wide, 1 & 1/2 inch high including roller 1 & 3/8 without roller.The unit measures 3 & 1/16 long. Y best guess would be it was installed approximately 1978. ThanksJack

Attached are details and dimensions of the part and the channel opening size. Looked at product code 81-279. Is this the best choice, or is there another?Is it possible to go to a double wheel set because the double pane thermal door is quite heavy? Thank you John

Do you carry this roller? Or sell a roller that will be Universal for this replacement?

Please see attached photos. I believe this is a florida extruder International (millstone) sliding patio door. It is 6 feet by 8 feet and IMPACT GLASS. I need to replace all of the rollers. Can you please provide me with the model number of the door and the roller model numbers that I ne ... (cont.)

Hello Swisco, Can you help me find a replacement roller like this? Its for a sliding glass door, these were installed in the 1990s I believe. Here are some pictures (attached here). Any information you can provide will be most appreciated! THANKS!!

I'm a handy guy and an engineer could not send from your web site?

Good afternoon! Hoping you can help by letting us know if it is possible to find a roller assembly like this one. Think the door was bought back in 1970's. The width is about 3/4 inch, probably looking for a needle in a hay stack, but will be easier if I can find a replacement. If you think yo ... (cont.)

pulled this well worn roller assembly out of a 1960 vintage sliding glass door, any idea if one of the available replacement units would work? I'm assuming the only way I could find this exact unit would be salvage from a similar vintage door.... thanks for any help

Please see attached picture and measurements. The only writing on it is "IHC Miami". Doors must be 25 years old.

Hi, the photo and drawing I've attached are from a PE del Mar wheel (they do not have stock). I believe this is the same as your 81-279, but your drawing does not include a couple of key measurements. These are indicated on the drawing in red. Can you please confirm your wheel will be a suitable rep ... (cont.)