Viewing all customer Discussions for:

39-417 Tie Bar Guide

These plastic parts have disintegrated over time.

no. 39-417 no. 49-448

Looking for plastic support brackets.they hold the sliding locking rods in place

Hello, Im looking for replacement clips that hold the lock bar in my bay windows. The bar is activated by the lever visible in the bottom of the window...the bar slides up and down and has 3 protrusions which grab the window and pull it in tight to the sash when closed. There are 3 of these clips sp ... (cont.)

manufacturer: NFRC 100 code: HII-280-1 spec; NFRC series: CLCASE mst: 280-m-006,7,14,15 Please provide hinge set for this type of window thank you Nathan

I need a few of these parts that hold the lock bar in place, otherwise the window does not lock and the bar just goes loose.

We are looking for the small white plastic part in the second pic. It attaches to the window frame, i think as a latch. I thought the pic of the handle might help? thank you

Looking to replace this guide block for latching bar on two crank out windows just old,brittle. Need four

See title above

Hi I'm looking for 4 replacement tie bars for my Nami casement windows, as well as 2 new crank mechanisms (part name?). I have included a picture of the window sticker if that info is helpful. Thank you!

The window hardware on the casement window is Truth. One of the tie bar guides has broken and I want to replace it. I am attaching a picture of the broken one and an adjacent good part.

Do you have those parts in aluminum or different materials because the plastic intend to break

Im looking for crestline replacement parts, the lock looks like a 38-095, the clip or nylon guide i have not been able to find.

Casement window part. Located at top and bottom of each crank out window.

Weathershield V-2000 Vinyl Casement windowthe vinyl keepers for the locking rod on my casement windows are getting brittle and breaking. i need replacement keepers for about a 15 plus windows at 3 per window. roughly 50 total keepers.

I am trying to locate the left lock mechanism (right side pictured) and the white plastic bushings (guides). I need the parts that engage the window to pull it secure against the weather seal gasket.

Do you have these by chance? They hold the metal vertical are against the frame of the window to open and close.

This is an in tacked part that I need for a window lock. It holds the arm that moves up and down to lock the window.

My wind out Crestline window will not stay closed (IMG 1802). The plastic pieces holding the sliding metal track have deteriorated (due to the sun and age). I need two different parts. One is the part (IMG 1803) to hold the sliding metal rail that goes up and down when you try to secure the windo ... (cont.)

hi, i have these black clips on the sliding windows in my house. they do night reach long enough to lock the window tight. do you know what these are called, and where i can find a slightly bigger one?