Viewing all customer Discussions for:

81-279 Patio Roller Assembly, 1-1/4" Steel Ball Bearing

It fits inside a bracket that is in patio door still. The bracket is brass too and has a thread bolt keeping it in place and I can't remove the carriage. This part is about .75" thick let me know what else you need from me. and thank you

i have to preface this by saying it was really hard to get the wheel assembly out. it was filthy and the visibility was bad. the outer assembly had a screw holding it to the bottom frame so we kind of bent every thing up before realizing there was a screw. the outer assemblu got mangled. the wheel ... (cont.)

Looking to replace these rollers. Patio door is over 30 years old and has no tags for id.

Measure 3-1/8" x 1-7/8" x 5/8"

Is there a replacement for this or something i can make work? length 3 1/4 width 3/4 height 1 3/8 Wheel 1'

don't find any numbers

Hello, I have a 30 year old heavy aluminum tempered glass patio door with damaged rollers. The rollers are made of steel with 1.25 inch wheel diameter. There is a roller with one wheel on each side of the door. The dimensions of the housing is 2.25 by 1.25 inches, 3/8 inches thick. There is a recta ... (cont.)

Hello, I am looking for replacement rollers for my GLW sliding patio door. I haven’t pulled the door out yet, and I’m hoping you can tell me if you have replacement rollers in stock so that I can obtain them before removing the door.Are the images below enough for you to determine which ... (cont.)

Wondering if you have these? I have never seen this style of patio door roller.

Looking for a replacement

Searching for a replacement roller for this original. Thank you!

Theres rollers seem to use multiple long bearings to roll, I cannot find any product like it. I am looking for any replacemnt that will work. The crew in from the bottom upward.

3 1/4 long 1 1/2 high 5/8" wide plastic individual bearings

Unknown

I have this roller on our sliding door but the door it's self is still good the rollers are bad is there any that could work in place of these

The only markings are ASTR BEC MOCO IN A CIRCLE on top of the roller. To get the rollers out I needed to remove door and knock out bottom rail to access top screw to remove roller.

Please tell me what part I need to order.

Please advise what would be the replacement part for the screen door wheel? Thank you

Width 3/4 in Height 1 1/4 in Length 3 in Wheel Width 1/4 in Can't find a similair style or replacement style that is similar - any help would be appreciated! Pretty old I think. Sliding glass patio door in a house we manage - maintenance cannot find a replacement for it.

Patio door brand not available. Sliders have multiple small cylindrical rollers.