Viewing all customer Discussions for:

26-215 Neutral Top Tilt Latch, 2-1/2"

Hi! I'm hoping to find the correct tilt latch replacement pieces. Here's a photo and measurements. Thank you so much for your help!

Can you please identify every replacement? Thanks

Length 3 5/16, height 1 3/16, Screws are 2 1/2 inch apart

Could you help me find these parts for my vinyl windows. Iv'e seen similar ones in your inventory but the dimensions aren't the same. Something close to these dimensions would work. Color = white Tilt Latch: Need both left and right or 8 window pairs Length = 3 1/4" or 3 5/16" wide = 1 1/4" Hole ... (cont.)

Images attached

Currently in the last stretch or our rehab and need to replace or install missing some: Tilt Latches, Vent Locks and Sash Locks. I was not able to find a window model number but was able to find the manufacturer. I was planing to stop by and take some measurements but I figured you may know what par ... (cont.)

The bottom measures 3-1/2 in. long and 1-5/16 in wide. The screw holes are 2-1/2 in apart. The base is numbered 515-A while the moving part is numbered 515-B. The window itself has no identifying marks. I need two right side latches and one left side latch.

I'm looking for a replacement tilt latch in black. Part 26-215 seems to be a perfect match for dimensions. Do you have something that will work in black?

Looking for replacement sash lock and keeper as shown in attached photos but in white. Labeling on sash lock is Entry Guard Truth 40264. Approximate dimensions: Overall length of lock is 2 1/2", width is 1 1/8" and distance between mounting holes is 2". Also looking for replacement tilt window ... (cont.)

No name of manufacturer, looking for tilt tabs

My house is about 30 years old. The tilt latch of my window broke on the right side. The holes are about 2.5 inch apart. I cant find the part anywhere. I could not find the brand or part number on ot.

I have an older home with season all windows. The bottom sash glass is broke and one of the top latchs is busted. I'm wanting to price a new window sash. It's a rental house so I haven't cleaned the window yet Sorry for the dirtiness in the picture. I'll have to get the measurements for you but is ... (cont.)

I'm renovating a house.

Hello! Please see attached photo with dimensions indicated in the photo.

Hello, we need surface mounts for our windows and after looking through your catalog we realize you don't have the exact match for the ones we have. The closest ones are 26-078/9, 26-163, and 26-188. Will any of these work for our windows?

Hi I need to find a replacement part for the window sash lock. Width between screws are 2-1/4" standard. However, I will need something close to 1mm in order for the extruding lock portion to engage with the window. Most common one I found are just half the way reaching the window frame. I found the ... (cont.)

Measurements 3 1/4" L and NOT INCLUDING THE LOCKING PROTRUDING OART 1 1/4"wide Scew holes (2) are set 2 1/2" apart -center to center As Can see from the pic the screw hole WHIXH Doesnt house the protruding locking part sits very close to end of the part The 2nd screw hole sits on. Enter ... (cont.)

tilt windoe latch 3 1/2 lenght 1 3/8 wide 2 1/2 center hole to center hole

Looking for replacement parts for vinyl windows heavy duty latch?