Viewing all customer Discussions for:

26-215 Neutral Top Tilt Latch, 2-1/2"

Part says Thermal.Gard by Season-all

Surface mounted latch for tilt window: My windows are white metal and quite large. The latches are all replacements I believe, witness the contrasting color. Some are slightly too large I think. They have even drilled a second hole to retrofit a latch . Any advice how I can identify the correct lat ... (cont.)

I need a few Surface Mounted Tilt Window Replacement Latches. The length in 3.5". I need the left and right latches. Please see attached picture.

SS-66887.05 #1

Hi- I am having trouble finding this latch on your website. It's 3 inches long and essentially 2.5 inches between screw holes. Thank you!

Hi Tom,I recently purchased 2- 26-188 tilt latches that look like what i have but they do not match up so after measuring the 26-215 will work but do you have them in dark brown or black. Thank you Dave

hello, I need the item attached. its a vinyl window tilt latch. house was built in 1975 and the exact size seems to be hard to find. I have traced the latch and extended the broken area to get a measurement. the latch measures 3.5 in length and 1.25 in width and 0.25 in height. if you have this ... (cont.)

I believe the left part of this image shows the sweep latch, but not sure what the right portion is and if you have it. The right portion says "Thermal Gard by Season-All" and is about 4" x 1-1/8" according the photo my customer sent me.

My computer was acting up earlier and I am not sure if you received the previous email, but I now have pictures. I have Season All Industries windows, model 195 that were installed in 1985. I have at least one latch and possibly some more that are broken. I spoke with one of your representatives ... (cont.)

Trying to identify this broken window tilt latch. The windows are about 7 years old and trying to figure out the latch. Everyone I search for is 2-3" but this is 4". I tried just swapping the underside but most of the latches have one spring and this has two. Please help.

I need help identifying this left-hand surface mounted window latch. The latch is approximately 3 1/2 inches long and the screw holes are 2 1/2 inches apart on center. The latch is approximately 5/8 of an inch high (I've included an image of the RH latch so you can see what a non-broken one looks ... (cont.)

I need one of these locking mechanism for a Nuprime double hung window. It's the part that is on the top of the bottom window of the double hung. When you slide the moving part it allows the window to swing down so you can clean the window.

The attached pictures is all I have. They are old windows and have know markings. Is it possible to determine the latches by the pictures? If you need more information please let me know. It is for windows in rental property. Thanks, Jamie Ochman (203-913-3925)

2 1/2 inches from hole to hole 3 1/2 inches long 1 1/4 inches wide left/right adjustable/reversible Writing on it says "tilt safe". No marking on the actual windows themselves The current guides have "reversible" directions. The springy things with the angle at the end can flip over and m ... (cont.)

Hi guys, I need surface release replacement mounts for Traco double hung windows series TR 4300; I took a picture of label,can mail it if needed but,rest of it goes as follows; 851771 062503 202-008 I appreciate your help and would like to order parts if you have them ASAP

I need left and right replacement tilt latches for this Reynolds brand window. The latch is 3 1/2" long by 1 1/14" wide with holes spaced 2 1/2" apart. Do you have anything that would work?

For your item 26-215. What are the following dimensions? On the latch end ----distance from mounting hole to end of the unit? Also how long is the actual locking latch which projects into the window frame? I need 1/2".

Does this part come in any other colors? I need it in black but I can't seem to find it on your site. Maybe I overlooked it.

is the 26-215 sold in pairs, for -.-- or single it only shows one for right side