Viewing all customer Discussions for:

26-226 Pivot Bar, 3-1/16"

I'm thinking I need Tilt latches 26-442? Pivot bars either 26-405 or 26-226? Pivot shoes 15-215? Can I just replace the pivot shoe and use the old coil balance? If so how to separate it from the coil balance, I didn't see that in your videos only how to remove the shoe from a different type of coil ... (cont.)

I've been replacing coil balaces and pivot shoes on various windows over the past few weeks and I've come across the pins broken on the bottom of the sash. I'm not familiar with the name of the items. But it appears that there is a threaded whole at the bottom that has seem to have snapped off. Th ... (cont.)

I need help identifying the window parts. It's the spring loaded parts in the photos. They hold the window up when it's open.

Need 3 inch long x 1/4 pivot bar

I have Polaris windows. The small post that fits into the shoe on the right side of a window has broken off and I need to replace it. The shoe is in good condition.How can i get one?

I need Pivot Bars for several of my tilt-in vinyl windows. I didn't see the exact part on your website but I think part 26-226 Pivot Bar might work. The distance from the tip is 1-3/8" and that's exactly what I need but the overall length is longer than what I need. Do think this part might work. I ... (cont.)

Please see attached window parts that are broken, I need left and right to repair 6 windows. The pivot bar pivot pin has a U-shaped cam that's broken. It's a double coil with a number 5 on both coils, the metal coils are the only useable parts everything else is broken.

This the part the lower window hinges on

Good afternoon, I have Arcor double hung windows that have some broken parts and I noticed that on your website someone else was asking you about Arcor replacement parts. I called your Customer Service number and was told to email you some pictures of the parts The first picture is a close up of ... (cont.)

Hi, I thought I'd ordered the correct replacement pivot bar (265B) but apparently I was unaware that the former bar had threads in it. The hole on 365B is also just ever so slightly smaller than the old screws. The hole lines up fine with the existing one on the sash, so other than these issues I ca ... (cont.)

Hello, Need help identifying broken pieces. One has a # 8 and the other a # 3 Thank you, The measurements are "roughly" 2.75 length, 1.5" ctr of hole to head, the head itself is roughly 3/8" overall and that center piece in the middle is roughly ¼"

Hello, Need help identifying broken pieces. One has a # 8 and the other a # 3 Thank you, Tammy

Couldn't find it in your web.

Need an early pivot stright pin for a Harvey replacement tilt window. The pins first is 1" from the pin head . There are two holes.

Hello - This is a pivot bar for a Paramount window. It is 3" long in total. There are 2 screw holes opposite of the pivot point. One is 3/8" from the inside and the next is 1 3/8" from the inside. There are two little nubs that stick out on the sides and one little nub on top There is a marking: th ... (cont.)

Hi?I need help. I have replaced the coil assembly, but the pívot I chose doesn't fit. Maybe I chose the wrong parts? So, I've decided to start over. Here are the original parts. I need to fix two windows. I would appreciate any help you can give. Thank you, Tina

Bought a duplex need the tilt latch, (top corner),pivot rod, and coil spring shoe can't seem to find a match on your website and don't wanna order the wrong part thanks! Can't seem to find any numbers on the parts themselves

broken tilt wash pivot pin on q2 window

In 2007 we had windows replaced by Regency Windows. They are the double hung vinyl. Two of the bottom windows broke and we need the pivot bar and the pivot lock. In searching your web site I cannot find a pivot bar to match the one we have. The pivot bar is 2-3/4 and one has a number 8n it and t ... (cont.)

I need help identifying which replacement pivot bar I need. I have attached photos of a good one. It is 2 inches long and 5/8 inch wide. Any help is appreciated as I didn't see it when I browsed your site.ThanksNeal