Viewing all customer Discussions for:

26-226 Pivot Bar, 3-1/16"

Hi. Trying to find a replacement pivot bar like this. Total length 2 3/4". From hole to point of bar 1-3/8". Thank you!

Need to replace the attached window balance and the pegs that hook into the window balance.

The windows say they're Alside 901 series. I haven't been able to find any information about these windows.

Tilt shoe and springs. No obvious markings. Shoe is 1 1/4" wide, 1 3/8" tall and 1/2" deep. Springs are ~ 1 1/8" wide and 1/2" deep. Windows have no markings either.

K8

Pivot bar is 1/4" wide and 2 3/4" long. The distance between the threaded holes is 3/4". They stick out of window sash 1/2" Thanks!

I have 30-5/8 X59-1/2 inch Monarch double hung windows that the pins keep breaking. The part number I have is 141259-1. Can I order more?Janice

Think I know which ones to order, but rather the experts check

the components on window that hang the window in the sliding mechanism. one is broke

I have BF Rich Windows 013460 4098 DH VTCL LE 1 VTL240EW.I need Coil Balance Shoe W 1 1/4"x H 1 3/8" x 9/16" and Balance Spring (2 sets) for W 28.625 H 61.5 C 30.75 15 LBS(1 set) for W 28.625 H 37.25 c 18.62 10LBS Thank YouDale

Encore tilt in double hung need the blocks and tilt bars 5 pairs of each talked to Tim

need 4

This came from Window World windows. They are tilt windows. We need 12 of them.

overall length 2 1/4 between screw holes 1" 3/8 diameter of end circle 1/4 inch diameter of I on the end

Hi There:We have the Aurora 6000 series Tilt Double Hung and the pivot pins and the balance shoes are broken. 2 windows - a small bathroom window, and a large bedroom window. I believe I have the correct item numbers based on previous posts.Coil Balance Shoe #15-175, Slate Blue and Pivot Bar #26-226 ... (cont.)

Hello,Take a look at our 15-175 pivot shoe that is used with our S152 window sash support coil balance springs. Also, your pivot bar resembles our 26-226 but carefully compare the dimensions and hole spacing to make sure that it will work for you. Thank you!

Greetings I believe I have weather shield windows that pivot in. I am looking for the pivots at the bottom. I haven't found exact matches looking online. Thank you

Here are some pictures of the item I am looking for. Not sure what they are called.There are some numbers on them:9749 1. I'm hoping you can find a replacement part for me. We got these windows from our local lumberyard and they think the window company went out of business.

Hello,We've seen pivot bars like your a few times in the past. You can view our recommendations to a previous customer here. Our best replacement options would be either our 26-030 or 26-226 pivot bar. Some customers have had no issues while others have had to make modifications to get one of these ... (cont.)

I'm not sure which Pivot Bar to use. The Bar for my window was broken on both sides at the weakest point, the screw hole. I didn't think to actually measure anything with a digital caliper until after I put what remained of the pivot bar back to at least have a window in place. I did take a picture ... (cont.)