Viewing all customer Discussions for:

S395-30 30" Series 395 Channel Balance

PGT single hung window balance Metal channel: 30" long and 9/16" wide Markings on metal channel: 29 4 IP Caldwell Please advise which item to purchase Thank you

I am looking for a replacement slide for my window. We need two of these slides. The length of the metal is 30".

Window #3 Numbers: 29 5

I need a pair of channel balances for a Gapco window. See photos. Metal part of balance is 30" long. Mark on the back shows: d 2940

Need to price replacement channel balancer for a window. 30 inch metal c-channel. Looking to replace these.

Can you assist me by identifying this part and sending me a set? The length is 30 inches, not including the end caps.

Only number is 29 1 stamped on it. 1/2 wide and 30" long.

Hi, Can you help with what strength I need for the windows I have?

This window balance is marked 29 3 LP Caldwell. The channel is a 1/2in. The channel length measures 30in. There are no other markings that I can see. I believe the replacement product is your S395. I have more picture but your part identifier page limited me to 5 pictures. Please verify that t ... (cont.)

Markings on balance: 29 9 40# 25" LT AR CALDWELL I need a pair for one window.

My guess: channel balance S395-30 top sash guide PGT 18-015 Hello, I need the channel guides by caldwell 29 3 KP and 29 1 EP, and the sash guides. Does it look like I'm listing the correct parts needed? Thank you, Gary

I have a PGT Widow, model # SH-4000, 51 1/2in Wide by 61in High. The Balance has a stamping number 29 5. As you can see in the pictures, I am in need of the replacement Balances and Top Sash Guide....Am I correct? Please give me the part numbers for the pieces in need as I want four(4) of each part ... (cont.)

The stamp on my balance 2790 PF30. Which one should I buy?

Hi,I need to order replacement springs for my double hung windows. The channel is 30" long. See the attached pictures for the end tabs and hook. There are no markings on the existing springs. The windows were installed in 2004, in the orignal construction. Please let me know what is available. ... (cont.)

Hello, Metal part is 29 7/8" long

These measure 30" long in metal, 31 1/8" total.Reply with questions.Cynda

I'm looking for the replacement part number for a Caldwell balance that is stamped 29 2 HP.

Need this item replaced

I need to replace 2 balances. Window weighs about 30lbs

Please provide part numbers for this PGT single hung window:50.5"W x 31.5"TBalance: 31 inches long (including top and bottom plastic parts)Balance is imprinted with: 29 3 AX CMC 7Balance is 30" not including plastic end parts