Viewing all customer Discussions for:

S395-30 30" Series 395 Channel Balance

Thanks for all the videos and good info. I have about 7 PGT single-hung, no-tilt windows in house with the same problem: i can't open the window to remove the broken channel balance. The broken channel balance is out of the lower sash except for some length still inside the sash. Most of the cha ... (cont.)

Have hurricane glass windows need to identify part number to order several. Also is the part available in aluminum the plastic breaks easily? Thank you, John

Hi, I need balance rods for non tilting windows as follows: 1/2 in wide 30 inch long 19-005 on top 15-001 on bottom Product code S395-30. So far so good. My broken balance rods have, what appears to be 29 6 BSI LB, stamped on them. "BSI" is stamped vertical with

I ordered and received 2 30in channel balances. Everything worked fine but I couldn't put the windows back in. The reason being the wrong top as you can see in the attached photos. The ones replaced(white) do not have anything sticking out. The ones received(brown) have a bulge and won't allow me to ... (cont.)

I need to place an forder for 4 balances (2950. Code S100-30 19005 and 15-001 attached.) I have ordered from you in the past. Also need to identify. Top sash guide. Looks like PGT TOP SASH GUIDE. NOT SURE. Also don't know if bottom corner of windows gets a guide. None there now PLEASE PROVIDE ... (cont.)

Hi! I have a broken sash with the number printed on it 26 3 VR Caldwell can you help me with purchasing two complete replacements Thank you. Roger

Please help me identify these two window balances. They are off different windows (and homes) although they appear virtually identical other than the markings. One says 29 3 DQ CALDWELL The other says 29 3 IP CALDWELL The tracks are 9/16th wide. Each track is 30 inches long, not includi ... (cont.)

I need 4 replacement channel balances for windows at my house. The body is 30" long and has 29 4 IP CALDWELL written on the front. The windows these come from no longer stay up. In one case one of the balances still hooks up to the frame from the string hook, but it doesn't seem to have any effect ... (cont.)

Im trying to identify my exact part, seems like the top braket and toe mount braket dont match any combination you offer. please help. I have a few balances broken on my windows...

Part needed: Caldwell 29 - 3 - FQ 30"

I need to replace a pair of balances on one window. It has never worked since we moved in. As seen in the photos, they are 30" long, stamped with 2990EG B.S.I. 32 In the photos showing the end attachments, it shows both balances side by side. Please help me figure out the correct balance for my ... (cont.)

I NEED TWO CALDWELL WINDOW BALANCES. THE MODEL NUMBER APPEARS TO BE 29 1 JR? THE LENGTH OF THE METAL PORTION IS 30" EVEN.PLEASE LET ME KNOW IF THIS IS ENOUGH INFO TO ORDER. THANK YOU KEN

I've attached 5 pictures of the balance I need to replace. The metal portion is 29 7/8" long, 9/16" deep x 1/2" wide on the narrow side. Please give me availability and cost. I will need two...one for each side.

I need several replacement Caldwell window balances. 1/2" X 30" the only markings I can find on one of them is " 29 4 JP CALDWELL". Thanks, Ken

I need to replace some window balancers. The number printed on the window balancer is 29 5 CW CMC 10 and the other window balancer is marked 29 6 CW CMC 10. The metal channel from end of metal to end of metal measure 30" on both of these window balancers. Also, the bottom plastic guide measure 1 1/8 ... (cont.)

I have the attached pictures of my balance and it looks like a combination of 385 & 390. It also includes the marks "29 5" as well as "BSI" on the channel. Please let me know which one is the correct balance to order.

Need a few replacement balances. Old ones are 9/16" X 30"long. I cannot find a pic. with the proper bottom shoe on your site. Windows are PGT non tilt Series 4000. [about 6 years old.] Old ones are marked 29 6 HX CMC 11 Please help. Pics. Below Thanks , Dave