Viewing all customer Discussions for:

S395-30 30" Series 395 Channel Balance

I need two channel balances for a PGT moveable window measuring 31.5' x 50", and weighing about 28 lbs.

I need 4 each of three different spring balances for PGT windows that are from around 2004. Attached photo shows the part numbers on each unit. The part numbers are: 29 HP 36-38 A6X CMC 4

I need to order a replacement channel balances. Please see attached images for identification markings. Thank You!

Hello, I believe your Window Channel Balance, Product Code: S350-30, MAY work for my window, except I note that the wings on the plastic ends of your part are on opposite end parts from my own. Will this still work for my PGT window? The number on my channel balance is "29 5 KW CMC 7" Also shoul ... (cont.)

I purchased 12 S395-30 balances. Now that they have arrived and I compare them to my original balance I see that the shoe is a little different. Do you think the new shoe will work? Do you have a shoe like my original?

I need Qty- 2 Caldwell 10-2 GQ 11" metal to metal qty- 6 Caldwell 17-2 DQ 18" metal to metal qty- 4 Caldwell 29-2 HQ 30" metal to metal

The numbers on the spring is 29 s lv cmc 7 I don't see any other numbers I need a set of two. One for each side of window I have other windows that have issues, but have not taken them apart. When I figure out the part number thing, I'll work on those. Thanks for your help Chuck

this is a 30" caldwell balance. Im just checking to make sure this is a match for your model 351/2930

Part # on part shown in picture is 2926 DSL The sash weighs 40 lbs.and is hurricane glass. I am sure the part in picture is not heavy enough. The window is 42 inches wide and the top sash is fixed does not open. Thanks, John

I am looking to replace these two window channel guides, and the clips. The number should be visible in the phot, but to clarify it is 2920.

Hi Trying to replace the channel balances on this window. It's a Viking window. I've measured the metal part of the channel and it's 29 7/8". Looking at your website, my channel appears to be a S395, but can you confirm? The window sash weighs 19 pounds. The only writing on the channel is "29 4 E ... (cont.)

Hi, looking for advice on selecting a replacement channel balance. The number on existing balance is 2930 and is is 30 inches long. The width of the channel is 9/16

Hello, I am trying to confirm the proper replacement channel balance. My best attempt points me towards a Series 395 - 30" - 2930. What do the experts think?

The metal channel is 30" long. Width is 5/8 " Depth is 5/8 " The number stamped on it is 29 3 The Window was manufactured by PGT Industries, Nokomis, FL Thanks Bob

This is 30" in length 1/2" wide. I have attached the pictures here. Please let me know what exactly I should order

I have several broken channel balances. Code stamped on them is: 299 DT CMC4 They are 30 inches long, and white or metal in color. Chris

I need to replace two channel balances. One balance has a stamp 29 2 BSI RO and the other balance has stamped on it 29 6 BSI RO.

1/2 inch channel with 2920T markings What part number for 30" do I choose ? David

Balance is marked "29 3 BQ Caldwell". Length of the metal bar is 30" (not including the plastic ends). Can anyone confirm the correct replacement? Thank you in advance.

# 2950 Window spring balances and plastic keeper caps