Viewing all customer Discussions for:

S395-30 30" Series 395 Channel Balance

See attached photos for replacement parts

29 2 KR CALDWELL. 1/2 inch wide 30 inches long metal only

I need 2 of the 29's (pic 4) and 2 of the 11's (pic 5). Not sure what size to order based on only the one number on the balancer. Can you please tell me which balancer length I need. These balancers are on older aluminum 4000 series single hung (non-tilt) windows. I apprecite any help you can provid ... (cont.)

Marked 29 6 Thank you for your help.

The channel balances had come loose and were sitting at the bottom of the window on each side of the window frame so a picture of them "installed" was not possible. The measured length of the metal portion was 30"

Hi, I was hoping you could help me identify the part # for these (CALDWELL) parts for PGT window there are 2 different ones. I have bought replacement parts from Swisco in the past and they work great!

These are pictures of the balancers I need they're from pgt windows and has a stamp on it that says 2920 but when I measured it frame it read 30" thank you for your time

Please verify the appropriate model. Super old PGT windows.

It is 30 inches not including the plastic ends.

Part says 29 3 DX CMC 7 The metal channel is 30 inches long. Not sure what else you would need to help identify.

window balance assembly

I weighed the window sashand it does weigh 34 lbs.

Marled 29 3 KP Caldwell. 1997 vintage windows in Florida

Hi looking for two sets of channel balances plus the window part that holds the balance in place as shown in the photos attached. The windows are single hung. They seem heavy.

I would like assistance on verifying the replacement window channel balances I will need. Not including the plastic ends the metal is 30" long. Picture 2 in the middle shows the only markings I can see on the part. The metal channel appears to be 9/16" wide slightly larger than 1/2". I can weight th ... (cont.)

stamp reads 29 3 HP CALDWELL. We had to replace the regular glass for temper per building code and this won't hold the wait. I am not able to remove the sash and weigh it so all I can do is hope that you can help with that part. I choose between 32-35 lbs but not sure.

Seeking help identifying the window balance shown in the attached pictures. No markings on the existing balances, but comes from a non-tilt PGT storm door. Metal part of the channel is 30" long, width of channel is ~1/2 inch. Not sure of the weight of the sash but I will bring it someplace I can wei ... (cont.)

Hi,there.my name is Victor,I'm interested in buying 2 channel balances(pics included) to fix my window.please let me know if you guys carry these.

Stamp 29 4 HV CMC 2Metal part 30" x .5"

Looking for 2 of these window balance in the picture. ThesE are older PGT Windows