Viewing all customer Discussions for:

S395-30 30" Series 395 Channel Balance

Channel length 30 inches

Looking for replacement of channel balance 30" long 1/2" wide. Stamp on the channel is 2920

I need replacement parts for almost all my windows. The counterbalance valve is coming out through the top of the window so I also need the corner plastic parts for each window there is one on the top right and the top left.

Thanks for your help the balance is 30 inches

I have 2 individual windows that are side by side and are exactly the same. Please give me a quote for slides and hardware for both. This would be a total of 4 slides. I have provided photos based on what I learned from your website. The measurement that you asked for is 30". Also please include 4 o ... (cont.)

Hi, just trying to order the correct channel guides. It's 29" long and the number on it is 2950.

markings are 29 3 BV CMC 2. Top is winged bottom is not, I believe the top is 15P142 and the bottom is 15P162. I need a quantity of 2.

30inch long 1/2 inch wide. Tracks go on each side of window. I cant find replacement parts for this window. Any info would be appreciated

I have pretty much one broken sash in every window in the house. So I need total of 8 sashes for 4 windows. All measure 30 inch tip to tip ( aluminum part only) and width is 1/2".

Please would you identify and advise part number to order. Measuring the metal section, it is 1/2" wide by 30" long plus the plastic fittings in the photo. There is a number stamped on the metal but hard to read, it appears to be : 29 2 E BS1

Balance is 30" long (measured the metal part). The bottom clip broke.

What do you have in stock as a replacement part for my block and tackle load balance....the length of the metal is 30 inches...it is stamped as 29-3 and only one side appears to have wings....see photos...thanks Bob

I'm looking to properly identify my window replacement parts before I order. If you can give me the correct link, I'll order a couple now to confirm. If all is correct, I'll know which ones to order for the rest of my windows. The metal of the part measures at 30 inches. It's also hard to see in ... (cont.)

I need to purchase some of these to replace for some windows

I have several PGT SH-4000 single hung windows requiring balance replacement. Based on measurements and my pictures with measurements, would S395-30 be correct? The markings I see are: * 29 4 IV CMC 2 * 29 5 DW CMC 4 * 29 6 FW CMC 11 There are no stamps. One sash weighed about 27.4 lbs. Would Option ... (cont.)

These balancers are 30" and stamped 2950 BSI

I am replacing a channel balance marked 2919. What option/strength should it be replaced with? Richard

Window channel balance (I think I am using the correct term) for a PGT window. The only markings on the old channel balance in 29 5 KW CMC 1. The metal portion of the balance is30" long.

Please advise if you can supply the pictured valance springs and window channel balance cams for PGT windows.

Are you able to advise which balances are the appropriate option, as well as the sash guide, for a PGT SH400 single hung window?