Viewing all customer Discussions for:

S395-30 30" Series 395 Channel Balance

Channel is 30" stamped 2940

Channel length: 30 Channel stamp: S395 Channel balance top: 19-005 Channel balance bottom: 15-001 Base-series: 2950 Quantity: 2 OPT.2950

The metal bar is 30" long.

Hi, I need help figuring out which part to order. The metal part is 30" long. There is a stamp with 29-4 BSI and plastic pieces on each end. Thank you.

Single sash weighs 22 pounds. marks on balancer 29 4 FX CMC 7 at channel length of 30 in

Balance measures 30" / 1/2"

Looking for the correct channel balance . These are marked 29 4. They are on a PGT non-tilt window.

SWISCO series 385 33 inch long, sash window weight is 50 pounds. Need 2, 1 for each side.

We have removed the balances from our window. Need to replace both balances. The window sash is 45.5 wide and 31.5 tall. It weighs 32 pounds. The current balance width is 1/2 " and the metal length is 30". The markings are 29 9..I'm sending pictures of current balance. Please advise. ... (cont.)

We need balance and guides for our windows

Hi, looking at replacing PGT channel balances and top sash guides. I think I've found the balances (S395-30) with non-tilt 1/2" 30" metal channel length. Can you confirm from my pictures? The top sash guides seem close but not exact. 18-015 looks the closest but with minor differences. There ... (cont.)

Hello, I have 2 PGT Windows. 34.25" wide x 31.5" tall each. I want to replace the balance springs - total 4 balances springs. Markings on the side are: 29 4 LU CMC 7. Can you tell me what product I need to purchase? Thank you, Marc

Hi need help getting 2 balances for my pgt window. The metal part is 30 inches long. I believe 5/8 channel. Can u help

Need 4 balances for PGT thermal pane weightSize 50 1/4 by 31 1/2Numbers 29 9 40# 25" LT HQ CALDWELL metal part of balance 30" with plastic ends 31 1/8Metal balance 5/8" x 5/8"Edward

It's a 30" window balance with the part number 29-3 0715 VBS written on it. Please let me know which part I should order from your website. Thank you!

There are no marking on balance, the existing balance is 30" long without the clipsI found a faint stamp on the balance it reads29-4. KX. CMC. 7

The Metal channels are 30.0" long There are no identifying numbers. the metal channel is 5/8" at the widest side (rolled edge) and 5/8" deep.

For Viking single hung aprox2/8x5/6. Bottom sash operating

Need to buy two replacements thank you

Top sash guide and window Chanel balance for a Viking window. BSI 2930 part number