Viewing all customer Discussions for:

58-189 36" High Performance Door Bottom

have a French Door 7281 installed 7-19-95 need to replace weather strip on bottom of door look like a metal bracket L shape with a strip glue to the bracket. have two per door, unable to slide the bracket due to age, what my option. Hate to drill into metal door for screw.

I need a new sweep that attaches to bottom of door. Door is 35" wide and 1 3/4 " thick. The old sweep has a single kerf along the middle of it and attaches via a groove in the bottom of the door. It is made of hard plastic with 5 very flexible fins that protrude down to meet the threshold when t ... (cont.)

Need door sweep for above 2018 Jeld wen door - there are 4 or so fins upon the sweep thats keeps the door air tight - Lowe's stated that you only have in black now

So the attached photo is a side shot of the bottom of my door. It has a hard plastic weather strip. One strip on the left is the exterior strip and a separate strip is on the right. They both have soft flexible rubber that would hang straight down to seek the door. The exterior strip extends 5/16 ... (cont.)

WILL TRY TO ATTACHE PHOTO BUT GLASS HAS "PPG HERCULITE " ON IT. DOOR IS WOOD CLAD WITH ALUMINUM. DOOR FACE...." BUTTS UP"... AGAINST THRESHOLD.

Looking for a quality part that will last (the OEM part lasted about 25) local hardware store had something that will last till I get a OEM equivalent. Thanks for looking Chuck

Hi I have these 2 items I'm trying to replace. Can you please identify them? Thank you

I need to replace the door sweep on 2 Pelli doors. If you look at picture closely you will see the sweep is friction fit into bottom of door. The door is 2" thick.

Hi, I am looking for replacement weatherstripping for a Stanley metal-clad exterior door.I need the bottom weatherstrip as well as the top and sides.The top and one side appear to be magnetic. The hinge side weatherstrip does not appear to be magnetic.Please see the attached pictures, perhaps they w ... (cont.)

Wider than normal - appears to be 2 1/8" wide Kerf Distance is around 1 1/16 which is also wider than normal

I need 2 door sweeps for JELD-WEN model # JW2059-01871

door sweep on 36" french door house built in 2002 door is metal

Hi, I'm looking to replace the underneath door sweep as its broken. Looks like the Its a Guardian door. Door specs in my picture

Swisco, Attached are pictures of my door sweep I am looking for. Would you have anything that would be similar to fit our doors? Thank You Swisco Support, The kerf dimensions on our doors measure 1 1/4" vs the 7/8" provided in the picture below. Thank You

Do you carry this seal?

You have helped me before and looking for your guidance again. I bought a home with double french inswinging doors that both need new bottom sweeps. I cannot locate a name on the door, but have pictures and measurements (left side 34 5/8", right door 34"). How can I send you some photos so you can s ... (cont.)

Pella Patio french door Sweep in swing french door Purchased 1995-1996 Door Width 1 15/16" Sweep Width @ door Bottom 1 5/8" Space between inserts 7/8"

Have 2 inward opening French doors whose sweeps are worn out. Need to replace but could not locate any names of the mfr on the inside glass or on the hardware. Let me know if you need a different set of photos to help identify these. The length is 34 5/8 for the left door and 34 for the right door - ... (cont.)

29 9/16" long 2" wide Two (2) mounting ridges (which insert into the bottom channels in the door) are 3/4" apart (wide) and 3/8" high

Neuma hinged patio door I am looking for a replacement weatherstripping. I have attached a photo. Please let me know if you need more information.