Viewing all customer Discussions for:

58-189 36" High Performance Door Bottom

Hello What is the height of the kerf fins? My stanley entry door is approximately 20+ years. I have tried Frosty King from HD & MD from Lowes the fins are 1/8 short. The old sweep fins are 3/8". TY

Hello, I'm looking replace the door sweep on the bottom of my 36 inch door. It's an entry door in the sky side lights and the door has ODL in the glass. I'm not sure if this is a curve attachment or not I see a rusty staple towards the end, the doors, an inch and three-quarter thick, are used me wit ... (cont.)

The dimensions of my door shows a 1" distance between the slots where this bottom goes. Is this the measurement for this product? Thanks

Looking for an OEM replacement for Jeldwen door sweep 1-3/4 in. x 36 in.

Customer service at Jeld Wen sent me to your website to get a replacement sweep. Can you identify the proper sweep from the attached photo?

Attached is a photo of the label on the door. I have four doors total, two at 32" and two at 36". I can cut a 36" to fit but I want to ensure I'm getting the correct part to work with. I think this is the correct part: https://www.swisco.com/36-high-performance/pd/Thresholds_Door-Bottoms/58-189 Th ... (cont.)

your part number 58-189 looks like what I need but the figure above shows the depth of the sweeps to be 5/8". That is too long for my door as the distance from door bottom to the threshold is 1/2". I previously bought a door bottom that was the size you quote and the door did not close all the wa ... (cont.)

Need door sweep for Marvin Integrity 3x0 6x8 exterior door. See photo for specs

I can't get a good picture however the house was built in 2014. I know it's Penrod as the hinges have it's name. It has a brown sweep. I couldn't get a part number from their site. Thanks! Rob Handyman Services. I have purchased items from you in the past and found you to be very helpful! ... (cont.)

Please let me know if you have any of these parts. I believe it it a Pella Designer series 8 x 5 ft French door. About 20 years old.

Trying to replace (2) Hoppe door seal / sweep. Door installed 2006. 3 bolt door with metal, wood, metal wood thickness. The sweep /seal fits up in the wood at bottom. Thanks, Tom.

Door bottom sweep with 2 ribbed inserts that go into bottom of the door. The ribbed that go into the bottom of the door are 3/4 of an inch apart. then there 2 half round vinyl that touch wood sill on the door frame. I need a replacement.

Please help me identify the parts for these doorsThank you Nancy

I have several Milgard doors that are about 20 to 25 years old that are leaking under the door at the threshold. i would like to replace the door bottom sweeps which are in poor condition to stop the leak. please advise as to what part to order. thank you!

Need weather stripping for old Pella French doors I thinks model # 2468?

32" wide metal door Sweep is: 1/2" height 1-7/8" depth 1" between snap in kerfs

Hello. I am looking for replacement door sweeps for 3 fiberglass entry doors identical (or nearly identical) to those pictured above. I am not able to provide photos of the installed sweeps without removing the doors. But that doesn't seem necessary in this case. The sample shown in the photos is ... (cont.)

Hello,I am looking for pieces of weatherstripping with this profile, can you help me with this?Courtney

Looking to identify this door bottom weather striping so I can get a replacement insert. Any ideas?

Can you please help me identify a part number, price, and expected delivery time frame?