Viewing all customer Discussions for:

58-189 36" High Performance Door Bottom

For exterior doors, in sweep, snaps in tracks under door frame. Need 8 of them. 30 inches long each.

Looking for a replacement door sweep for a steel exterior Pella door. Double kerfs 5/8 inch apart, sweep length 34.5 inches. I've attached photos of the old sweep and of the Pella entry system number which is located on the upper hinge of the door.Thanks for any help you can provide. --Vince ... (cont.)

Have two entry doors I need to replace thresholds. Would the 58-189 be the replacement?

i have (2) 1980's pella french doors which i need to replace the weather stripping. attached is photos. do you have a rplc part for this? also i would like the color to be preferably white or beige and not the dark brown i have shown you. the doors are getting painted white and i would the color to ... (cont.)

Hi, Do you have the bottom weatherstrip like this? I am going to order the strips for the side but cant find the strips for the bottom. The door is a pella 3082 in swing designer series french door. Thanks

Hello! I am looking for a replacement door sweep for the one I have pictured. It snaps into the bottom of my exterior door. Do you have a part that would be a suitable replacement? Thank you.

I need a door sweep that will cove a larger gap. What gap will this one cover? I need a 3/4 inch

2004 Therma tru exterior door . Will this sweep fit this door

Hi, This is my second post. I have looked at some of the bottom door sweeps, and I think the one I need 58-189. How does this fasten to the botoom of the door... Is it glued , screwed, or does it slide into a groove??? Billie Thank You

Need replacement Door seals on bottom and side

This is like md door sweep part # 5329818 / 67967. It is 42mm wide (1 5/8) 97mm (35 3/4) long. The ribs that go in the groves in the door bottom are approx 30 mm apart. I can not find any markings at all on the part.

I have a 32 inch solid exterior door. Do you have a 58-189 in 32 inches?

Hi, I need a replacement door sweep for a SwRI I.D. No. 98038-05-01. Is part number 58-189 the correct part number? Thanks in advance!

will the 58-190 fit my Stanley 36 inch by 1 1/2 to 1/3/4 wooden entry door it got to be over 10 years old

Could you please tell me what this sweep is made from. I've been told the vinyl doesn't last long. Thank you!

Hello - I need to get a replacement bottom door seal strip for a Stanley door that goes from the laundry room to our enclosed garage. The door is 31 3/4" wide 79 1/4" tall with a double groove on the bottom edge 7/8" apart on is 1 7/8" wide and runs the entire width of the door. The bottom door seal ... (cont.)

Do you have this Pella Door Sweep?

Hi, I have a 1 3/4" thick, 36" wide Stanley door. The previous door sweep was a snap in type. I did not think of measuring its dimensions before throwing it away, unfortunately.. The kerfs on my door, are 1" apart, not 7/8" apart as most of your door sweeps are designed for. Will your door sweeps w ... (cont.)

I see the original door sweep for: (SWRI 98038-05-01) (28915) has been discontinued. The bottom of the door is 31-1/2/inches long x 1-3/4/inches thick. As you will see in the attached photo's, the door sweep is set inside the bottom of the door. Could I use 58-189 as a replacement - "36" high pe ... (cont.)

I hope you can help me locate the replacement part(s) for the attached diagram. The current installed sweep is in two separate pieces. I greatly appreciate your help. Thank you Dwight