Viewing all customer Discussions for:

15-002 Channel Balance Shoe, 1" Depth

Two of my channel balances broke on what I think are Quaker Pamela windows. They are 35" long. I need four replacement balances They are stamped 3490 BSA RV 33.

Purchased 4 S372-29 Channel Balances. The bottom shoe is incorrect. I submitted a request for an exchange on April 26, 2014. I think that I need an S370-29. Please look at the attached photos from my old Channel balance and confirm. Thank you. Thomas

My windows are stamped Empire Pacific 1985 and original since home built in 1988. Some balances are stamped 1830 and others are stamped 1940. Can you assist with purchase of 4 each replacements for the 1830 and 12 each of the 1940 channel balances? Thank you

After reviewing all the parts, my shoes measure/look like the 15-001 and my tops measure/look exactly like the 19-005. Channel balances measure 28" and they have the 2740 stamp on them. Block and tackle style. I don't see them preassembled in your listing. Please provide a quote on a price. ... (cont.)

I've been trying to get my windows replaced for three months here in Canada... While I've had luck finding someone to re-install the glass, nobody seems to have the channel balance I've attached in this email. It's 1/2" x 39" and I'm just not sure if I could replace this sash with any of those on ... (cont.)

From plastic end to plastic end it is 25". It has 23 4 ko Caldwell stamped on it. And then I think it is 9/16 x 5/8.

Need this balance

the top and shoe are not same. BSI 2830 need help find 20

I need to replace a number of balances, the numbers stamped on the channels are: 2810 BSI, 2830 BSI, and 2440 BSI with a backward C. Having trouble identifying the balance shoes. The top shoe I am confident is a 19-002, however, the bottom shoe could be either a 15-001 (series 390) or 15-005 (ser ... (cont.)

This is a channel balance from an aluminum window, Alenco circa 1985. Has marking of 27 C. Measures 28 inches. I have identified the top piece as 19-002 but have not identified the bottom piece, or at least one that is close and might work. From looking at other customers post, possibly the S390 ... (cont.)

Do you have a balance with a part# 2230 stamped on it? Also the attached lock assembly? Thanks

I am looking for the replacement balance for my 25 year old Alenco windows. I also need the replacement vinyl weather seal at the bottom of the sash.

Hi Customer Support, I need 10 pairs of balances that look like this for the windows in our house. See attachments. Do you have the parts?

1/2'" channel balance for PGT window. Need both left and right. Looks like 19-005 on top and either 15-0001 or 15-002 on bottom. 29DS 1/2c 37 marked on back.

Hello, this is my first time replacing a channel balance. I have Alenco Windows and the images below are the channel balance that I need to have replaced. I have a 1/2 inch channel balance for non-tilt window approximately 16 inches long but I am unsure about the top and the shoe difference and was ... (cont.)

There are no numbers stamped anywhere on the balancers. Included are photos of the top and bottom of 1/2" x 29" balancers that I cannot verify from your photos. I hope these photos will illustrate which units I might have. All windows are the non-tilt out type aluminum windows. I also have a sin ... (cont.)

Hi there, I would like to see if you have a replacment for the balance spring. I have attached the pics. The window size is 29-1/2 tall;however the balance spring is only 26" in length with out counting the clips. Please help advise. Dan

Hi, I looked through your balance images, but could not find an exact match. The attached photos will hopefully let you figure it out. These are from two windows weighing 34 pounds each (four springs total). I noticed that the numbers on the side are different. Channel Width: 1/2" Channel ... (cont.)

Attached are photos of window balances that need replacing (circa 1983). Have included photos of the stampings (14A, 20C, and 24B)on the metal channels. Also need some 24C channels and a 26C channel. Does the A, B and C refer to the weights in the channels? All of the balance shoes are identical ... (cont.)

Thanks for your help! My 30" balance is stamped 29-9 JA2 CMC 2. It is a fairly wide and heavy window. Also, the shoe and top pieces don't look exactly like the 15-002 bottom shoe and 19-002 top shoe that you have pictured. I've attached pictures of mine. Thanks again!