Viewing all customer Discussions for:

26-266 Tilt Latch, Left Hand

A crank for a bathroom window; Locks for bay window; Piece to be able to bring window down

Do you have this part?

Which replacement tilt levers will replace these? The window sash is plastic welded together. Is there an option to buy surface mount replacements?

Window release clips/latch for double hung window.Two separate units labeled 14 & 401Please helpCarmen

I have attached 5 photos. The window itself weighs 12 pounds. If you could help me identify the parts, I would appreciate it. I am a handy homeowner.

HI there, the latch on my window will no longer retract so I can swing the window down to clean the exterior. I believe it's this part, but would like confirmation. https://www.swisco.com/Tilt-Latch-LH/pd/Surface-Mounted-Latches-For-Tilt-Windows/26-266 Thanks! -Brian

Window will not stay in.

I purchased item 26-408 (2) but they were too big.

Hello, From my measurements it looks like this part is a 2 5/8 inch x 11/16 inch window latch. It has a "t" shape at the end and is a snap in model. I am needing two left and one right replacments. Thank you

I am looking for the lift mechanism, locking pivot, pivot pin (looks like a straight pin with 2 screws up through the bottom of the window. And the pivot latch which slides into a pocket on the window. The one pictured is popped loose. Can you help without any more disassembly of the windows? ... (cont.)

Greeting, I have 2 windows in need of lower sash tilt locks. I cannot seem to find them. Please see attached pictures. Any help would be greatly appreciated. Thank-you, Scott

I have 2008 built house with vinly windows as you can see the broken parts. Would you clarify the parts.

No marking Need replacement to match the measurement

Looking for replacement for these 2 parts. Both vinyl windows

I need 2 of these latches

Looking for 10 sets (10 left and 10 right). Window tilt latch.

I have tilt latches 26-267 and 26-266. How do I remove these? Your video doesn't indicate these type on removal. Appreciate your help. Thanks, New Jersey

Looking for replacement tilt latches (left and right) for windows labelled 8501B, Series 8500/8660, Mfr. SIL-1, A.L.I. Validator. Would you be able to confirm that your 26-266 and 26-267 are the correct parts? Also, would you have replacement locks for that model window, and what would your P/N be ... (cont.)

Hello,I am looking for a replacement part. Can you assist? The one in the image is broken so it is not an exact representation of what I need.Please contact me with questions.Thank you, take care!J

can you help identify these tilt latches please. need 8 sets