Viewing all customer Discussions for:

58-114 25ft Kerf Mount Bubble Seal, 3/8"

These weather strips go around the window, the windows are removable, please let me know if you have this product. Do you sell by foot or by individual window size?

I need replacement weatherstrip for two 24x72 Acorn casement windows from circa 1991. It is a kerf style that looks like your part number 58-114. Are you familiar with this window?

Attached is a photo of two types of weatherstripping on my Pozzi casements windows. The kerfed white foam filled bulb type is where the casements shut together. The black kerfed bulb type with diagonal flaps is on top of both casements sash and between the sash and the window frame jamb. any sugg ... (cont.)

Trying to ID this part for my patio door. The only marking is on the door handle and says "K/K" on it and I believe it is a Kolbe door. The door is a inward swing type and the part is a piece of plastic that screws to the underside of the door and holds the weather stripping. It's (34.5 in x 1.5 in) ... (cont.)

Trying to find replacement for this push-in seal that is 3/8" wide and 5/16" tall. It pushes into a slot ringing the periphery of the moving part of the casement window and seals to the wall frame when cranked closed. It might have been a tube seal that crushed flat uniformly and broke years ago. I ... (cont.)

Hurd -- wood aluminum clad casement windows--plastic/vinyl (something) round weather stripping around the window. windoows were sold as Hurd Heat Mirror-triple glazed with mylar film in the space between the glass. would like to find something to replace the weather strip. if you want i c ... (cont.)

I see you have a stainless steel roller cap! That would be way better than the plastic crap from my old crestline sliding glass patio door. the replacements are lucky to last a year. Im not sure if your roller cap would fit? The roller cap from side to side is very close to a quarter inch and the r ... (cont.)

The bubble is about ⅜" in diameter and the stem is about ⅛"

I need 2 types of weather strip for my Pozzi windows that are 15 years old. One is a 3/8 inch bulb with a spike at the bottom with 2 barbs on it. The spike is about 1/4" on it with 2 barbs on it on either side. Once I have contact with you I will send a diagram of what it looks like. I need 1 ... (cont.)

I am looking for replacement weatherstripping for 1983 Norco casement windows. There are two kinds of seals on each window. One is a white silicon 1/4" bulb seal with a flap on one side which goes around the frame. The other one is a leaf seal that is brown (color doesn't matter) and appears to b ... (cont.)

Hi, our windows are wood and about 15 years old. Recently I noticed a gap between the bubble seal and the window threshold on one end of the window bottom. The window threshold is newly replaced and properly installed. I noticed the window itself is slightly higher on the left side. Hence the quart ... (cont.)

We have a Pella sliding door that uses Kerf Mount bubble seal. From process of elimination it has to be either the 58-153,-114, or -053. After taking many measurements & pics, we've determined the diameter of the bubble is 7/16ths, the length of base extension is 5/16ths. As you can see, none of ... (cont.)

I am looking to replace the window seals/weather stripping and although the picture is not too clear, there are two slots in the window for the bulb seal to be inserted, one is a barbed/kerf and the other (outer) angle smaller slot.

30 year old Weathershield casement windows. Need to replace weatherstripping. Ann

Can you please identify the seal in the attached picture showing a cross section of the seal. I will need a reel of the stuff to cover many windows. I did not find any marking on the window to help identify the manufacturer. Thanks

Window Bottom Bubble Seal. Unsure of name brand of window. Measurements are included on the picture. Looking for an exact match or something that will fit the same dimensions and provide a seal. Thank you! Mitch

Hi, I have a few Pella sliding glass doors which are about 8-10 years old. I am trying to replace sections of the weatherstripping with as close to original product as possible. It seems like the weatherstripping I have is a little bigger (3/8") than what I've found. It also looks like the bulb p ... (cont.)

The door does not have existing stripping so I can't show you sample. There is a slot around the frame but not on the usual face but on the side of the frame. Also the slot is ~1/16" wide vs normal 1/8" slot. It is 1/4" deep. I have attached images and a sketch. Thanks Richard

Windows are 25 years old and have the original weatherstripping. 1/2" overall length, 14/" bulb & 1/4" stem. What do you have that will fit . Thanks Peter