Viewing all customer Discussions for:

82-107 Sliding Door Latch Lever Kit

Held-wen sliding door latch needs replacement. Is product code 82-107 the correct replacement ? Thank you, JoAnne

Need replacement part- Brass Handle SGD-R25 SERIES:9390 (YR:1995?) The inside latch/lever broke off. Measurements between screws is just under 4"?? Any direction or help is appreciated since door can't be locked!!;)

The latch on my sliding glass door was sticking frequently and would not latch. Today it snapped off!! Do I need to replace the entire handle or can that piece be replaced separately?

I need a repair part to fix this broken door lock.

I am looking to replace a broken locking latch on a sliding door. The photos are attached. The measurement between the screws on the latch is 4 inches. Please Advise!Kevin

I'm attempting to replace the switch on this lock. Patent 5125703 off white. Please help. Ron

I followed the video about how to assemble the latch but when I hammered the push nut onto the assembly it broke, how can I get a new push nut? I have checked all around at the local big box and some local hardware and specialty stores and can't fin one. Found some on line but don't wish to spend ... (cont.)

The handle is fine the only part I need is the lock and the inside locking lever The door handle is a sash control 2265, are there replacement parts available? Thank you, Linda

We have Andersen sliding glass Silver Line doors and the inside latch is broken. My husband saw a number on the door that was WTPD271, but I'm not sure this is the door model number or not. This sliding door does have a lock from the outside of the door. If you need additional information, please l ... (cont.)

One of the "teeth" on my Pella thumb turn broke off. Product Code: 82-107 looks like an exact match, but want to make certain before ordering as to avoid paying shipping costs both ways. See attached picture. Many thanks!

Sliding Glass Door Lever:NAMI NFRC 100/200 code spec Series:800 SGD MST:62610You guys sent me two levers: Item 82-106The lever stem that inserts in the lock is not nearly long enough. I will need two of them, so let me know if you have them an I will return the other two.Much appreciated,Mark ... (cont.)

I dont see any manufacturer markings anywhere on the door. Not sure if I have to replace just the lock lever or the entire handle assembly. Can you help?

I just need the plastic bumper around the latch mechanism (see arrow). Everything else is OK so far. Do you carry them? Please let me know since this is a really difficult part to find on the internet.

The lever broke off and I am trying to identify who makes this part for replacement. I imagine I have to replace the entire luck, I?m just not sure where to find it. When this latch broke off part of the pin stood inside. Tried to use tweezers to remove. Can I just replace the latch or do I need t ... (cont.)

I have Sash Controls sliding glass door 2265 with an outside lock (with key) and an inside lock (via latch). The latch broke-- I think this may be part 82-107, but I am not sure. The main piece of the latch is approx 2" long. The lever pin appears to be about 3/4" long. Is it possible, as I hope ... (cont.)

The locking mechanism broke on my slider. The door is a Jeld-wen

JW is printed on the outside of the sliding glass door handle. Looking to replace the locking lever.

I have a Mortise 2 point 82-265 with key lock on the outside. The inside locking lever is missing. Do you sell this part? What is the part number and how much is it? Thanks

The latch broke off my sliding glass door handle. Can I just replace the latch? Or do I need do I need a whole new handle/lock set? I don't have the broken piece. The lock is 11.75 inches. Thanks

What do I need to replace