Viewing all customer Discussions for:

26-289 RH Tilt Window Latch, 1-7/16"

1. Window Lock - Entry guard, Truth, U.S pat 268.643 2. Tilt latch P54, P55

Hello,I'm looking to replace my tilt latches on my windows. The brand of windows that I have in my house are Certainteed. They are fairly old but in good shape. I believe the tilt latches are original. I'll be needing 52 total. 26 left and 26 right. I have taken some pictures with the measurements ... (cont.)

As can be seen in the pictures, the tilt latches need to be replaced. Please help identify new latches that will fit.

Hello, I'm trying to find replacement parts for a CertainTeed window that we have that won't stay up unless we hold it. Our guess is that the coil and springs are broken. We've removed them from both sides of the window and included pictures of the hardware in question. Our issue is that we can't fi ... (cont.)

For bottom sash of tilt-inward vinyl replacement window Dimensions: Hole (screw) spacing: 1-7/16" Width: 1-7/16" Length: 2-7/8" I need the left and right side.

Hi there the plastic piece on top of window that broke due to the safety meachnsism that stops the window from opening too much Need replacement

Attached are two different brackets. The plastic bracket is from a tilt-out style window, metal frame. The metal bracket is from vinyl replacement windows that tilt in for cleaning. I have no numbers for either part. Please let me know if you carry either one of these brackets, or both. Thank y ... (cont.)

Width 1 7/16". Length 2 7/8"Distance between hole centerlines. 1 7/16"Distance hole centerline to edge 11/16"As you can see the latches have disintegrated losing their Projection tip or the casing has fallen apart. I believe theLatches are the same for upper and lower windows.The vinyl windows c ... (cont.)

Looking to replace a broken window "side latch" on CertainTeed double hung window. Left side, looks like the attached photo (the one in the photo is NOT broken).

I need both sides for a vinyl window

Seeking a replacement "Tilt Lock" for a Polaris double hung vinyl window. Lock face is close to, but not quite aligned with hole centerline. No part number on window or tilt lock.

Tilt latch 2 3/4 "long screw holes 2" apart Polares window

Certainteed tilt window

Hi. Here a a photo of a right certainteed internal latch that I cannot find anywhere. It is 3 1/2" long by about 11/16"can you please help me find this. Also can you help me identify the pivot arm part and new fasteners to attach them to the same windows. Than you so much! Eric

One pair of latches needed. Main body is 2-3/4 in. length, with 1-3/4 in. between hole centers.

This is a Polaris latch with an L and a small 3 on back. It?s approximately 3 x 1 1/2 Left side. Can you help?

The windows say 95 as a number and VIRep I am missing the latch/lock on the top of a window and the two parts that hold the top of the bottom window into the frame/the part used to remove the window-tip forward. I am also trying to find the appropriate brush like strip to replace on many of the s ... (cont.)

Hello, I am looking for replacement sash pins for a single hung sure lock tilt balance system window that look like this.the home was built in 2001. Thank you for any help you can offer.

Windows purchased in 1990's. Have left and right top part that are cracked. Can you identify this part and do you have it in stock?

This is the cover for the release mechanism for a double-hung window. The lip of both screw holes have chipped to the point that the screw head goes through.