Viewing all customer Discussions for:

26-310 Pivot Bars, Pair

Need new balance's where the string broke, pivot broken and bottom of window pin that goes into pivot broken. Trying to find parts to repair.

Will pivot bar 26-310 replace a Harvey window Pivot Bar CCDH 10179.03?

R 1568-1L 1567-2I was provided your company from Tiip in CanadaFred

I am looking for the sash lock and the sash pivot for the double hung. And the operator and cover on the casement window. the casement operator has the number 31538 stamped on the split arm and EntryGard truth on the straight arm.

Double hung trim line windows Tried your 26-402 it's too short in the dimension shown in photos. The picture is original trimline part

I need left and right stod picture is showing stud that is broken knob is missing moro photos I believe the make is Jeld-Win I am retired house bilder very familiar with windows I also need insolation stip from the side of the window Thanks Doug

Hi - this from the bottom left side of the bottom window of a double hung window set. It's the kind you can open towards you in order to wash the windows. This part snapped and we need to replace it. Sorry that I don't know the name of it or the brand of windows. I will be so happy and impressed ... (cont.)

Take a look at our 26-310. These could be what you need.

From the pictures, it appears 15-129 pivot shoe is correct, but to verify, mine is 9/16 thick x 15/16 wide x a bit over 1/3/4 long (top is broken off) Also the 26-310 pivot bar looks correct. These two parts are compatible? Thanks.

Hello, I match the shoe of my windows to 15-135. The pivot is similar to 26-310, except is 1-3/16, instead of 1-1/16. Holes are 5/8" on center instead of 3/4". Height is 1-5/16 instead of 1-7/16. I believe the windows were built by Trendline.

Please see attached picture and let me know if I can order 8 replacement pivot bars.Thanks,Gregg

It came off the bottom of the double pane window panel. There is one on each side that sits in the spring loaded slide pieces. Not sure of the window brand but there is a number on the piece shown in picture. I need a left and right side piece.

The bottom pin is 1 5/16" wide, the cross T is 1 3/8" long (including width of bottom pin). The actual pin is 11/16 to the cross T, the support extension opposite the pin is 3/4". I don't see any markings on the pivot bars or the windows so I don't have any manufacturer information. If you know of a ... (cont.)

I have a large Trimline double-hung window with a broken spring balance. Some of the parts are potmetal castings that have broken. There is a big spring and a double-sheave pulley. Can you supply a replacement and installation advice? I'm a fairly handy homeowner. Thanks!

The stem on the bottom right must be at least 5/8

Hi, I need this part. Do you ship t Canada?

We have these style of sash pins in our historic district, we believe they are eagle window parts. Do you guys carry anything like this? The spacing between the holes on ours is roughly 5/8

These pivots are bolted at the base, each side of the window. The window was not locked properly and a strong wind broke these pivots. Fortunately the window itself did not brake. Now I'm looking to replace these small metal parts. Thank You. Denis

I am looking for Latches for the top of tilt windows and the pivot point that attaches to the bottom of the window, as per the attached pictures

I'm looking for some replacement pivot bats, I've ordered Some in the past but I can't access my account.