Viewing all customer Discussions for:

32-350 1-3/4" Drawer Slide Spacer

I need several of these. They are brackets for the drawer pull out in my cabinet.

This part broke in half. It 2" in length from end to end.

Do you carry any anchors as shown in the pictures for a drawer glide?

Hello! My slide out pantry shelf recently broke and I am unsure of what I need to purchase to fix it. The side is labeled UNIGRASS 6600 but I can't seem to find anything like what I need online.

Hi, I wondered if you could help me ID this plastic piece and others like it placed on the corners of the back of the drawer doors. The piece is under 3 cm. long and a bit over 1 cm. on the top. The pieces aren't supposed to move, but because the drawer is so old, they can be spun around so they ne ... (cont.)

Used for a rolling shelf in a Kraftmaid cabinet. Need one

I ordered Home Depot Schrock cabinets 15 years ago or so and need to replace the glides on this lower unit. HD was not able to help. I can get you depth measurements if you have these available to you - starting with some pictures. Schrock has "proprietary" holes pre-drilled for their glides and I ... (cont.)

Several of our drawer guides have broken. The system seems to be a Brookhaven cabinets. They appear to be 3/4" or 2cm wide and 2" tall. Would appreciate your help identifying the correct replacement parts. Many thanks! Echo

I need 2 of these pieces to make my drawer work but I only have one due to the other breaking. It's about 1-1 1/2 inches. Please contact me back as soon as possible as I am trying to finish this job. Thank you in advance!

The part that holds the sliding drawer bracket to the cabimet has broken. All other parts in tact. The screw holes that mount to the mounting strip on cabinet wall are 1 1/2 inches apart and use Phillips screws. Can't see if it's just one or 2 screws holding it to the mounting bracket. But there ... (cont.)

I need a replacement parts. Thank you.

I need to replace the small brown plastic bracket in our kitchen lower cabinet. The cabinets are no longer being made and Home Depot and Ace Hardware did not have anything similar that would allow us to use the sliding drawer/shelf. Please let us know if you have a mechanism that is similar. Or perh ... (cont.)

This piece shown in photo has no numbers name etc. it s plastic. I need identification so I can order. Home Depot and Lowe's are nearby. Will these stores carry parts? ThanksGeorge

Hello: Would you have plastic replacement part that looks like the one in photo? No name or number on it or cabinet. Thanks for any help.

I'm looking for an under mount drawer guide that will replace a Mepla 2035/572. Do you have anything like that? The measurement from the back of the drawer front to the back of the drawer box is 20.75". The measurement from the front of the cabinet face to the back wall of the cabinet is 23.5". This ... (cont.)

I'm looking for part number, manufacturer, source to buy the pictured part.

This bracket is 2-15/16" wide and 1-3/8" tall on the side that mounts to the slide. On the cabinet mounting side it is 3/4" wide and 1-11/16" tall. Spacer distance is 1-13/16", mounting surface to shelf side. No markings on the part, but the slide rail has LC and 36-05 marked on it. The mount has b ... (cont.)

screw and dowel looks to be 32mm apart 1.25 inch longest width is 3 inches.....no markings on it but believe it is Grass America.....rear mount is Grass and so is drawer slide

Do you have this part?

Hi looking for 8 units . They come from wood-mode drawer sliding .