Viewing all customer Discussions for:

58-200 Kerf Mount Sweep Seal, 8ft length

They're series 5520 C-C20/C-C40? I've attached photos of the channel the seal slides into and measurements of the seal.

Dear Swisco, Is your product code 58-200 the same as my photo sample? Your dimensions match what I have. I am verifying befor ordering eight packages. Thank you, Mike

Top, Bottom and side views attached. Plastic stripping is brittle and cracking. The soft rubber fin is getting hard and falling apart. We live in the high desert. Intense UV Rays and dry. What do you recommend? I have a lot of windows ....

5/16 bulb, in white. T portion is about 3/16 tall by 1/4" wide. Will need a 100ft roll

Part that fits in channel is. 1/4 ''two different types of weather stripping one has flange one does not. Need both the main thing is the 1/4 '' that fits in channel anything smaller just doesn't hold Thank you Paul

I need to replace the weather stripping at the bottom of two Jeld-Wen casement windows that are 28" wide each. I've attached digital pictures of the piece and would appreciate any help. Best Regards, Keith

I have a maybe 15 year old crank opening window from Home Depot or Lowes that needs ne weather stripping. The kerf width is thick. Maybe 1/4 inch or a bit less. 5 or 6 cm's.

The folded over piece is 1/2". The piece that fits in the slot is 1/4".

I am looking for this moldering to replace on my 25+ year old casement windows, which I believe are Marvin.

This weatherstripping is from windows that were installed in the late 90s

I ordered Part 58-200. Its profile will work for my application, except for, the spline that snaps into the window is only 7/32" (.218) and the kerf width on the window is the same, so it doesn't snap in and falls out. The window is casement style, 20 years old from Patriot Windows of Hammonton NJ ... (cont.)

We need help identifying and purchasing the correct pinch jam seals on our glass patio door.

It is inserted into a groove on the inside of the locking jamb.I need a (at least one) piece about 84" or longer.Thanks!Eric

I guess this is a strip of weatherstripping that was on our sliding glass door in a Four Seasons sunroom. (The door has a Conservaglass logo). The strip measures 77 inches. We've been to several hardware stores and they weren't able to help. Any help you can give would be greatly appreciated. T ... (cont.)

Photos of me window weather stripping, do you stock

This "T" shaped weatherstripping is located in a small channel all the way around the sliding patio door.

These are the window seals on JELD WEN casement windows on a house constructed in the early 80's. There are 2 seals on each window, one on the sash and one on the frame. I need seals for 3 windows, each measuring approximately 64 1/4" high and 23" wide. I also need the window operators for 2 wind ... (cont.)

A friend has casement windows identified only as 'Roti' with a curiously shaped R. The weather seals have become gummy and crumbly with age. Can Swisco offer a replacement seal? The fin which sets in the kerf measures 1/4" deep, the attached side 3/8" wide and the other side of the 90° angle 5/16". ... (cont.)

Hi I am in need of 1 right and 1 left side jeld-wen window crank operator replacements as seen in the photo. I also need replacement weatherstripping for the casement window as seen in the photo. Could you please let me know where to order these at on your site? Thanks, John

Hi - and idea where I can get the leaf stripping that borders my patio door ? The thickness of the material/leaf sections is maybe 1/32" and a semi rigid material . See photos for overall dimensions ! Thanks !!! Help or leads appreciated !! Need like 6 pieces 80" long Kevin Montana - ... (cont.)