Viewing all customer Discussions for:

58-200 Kerf Mount Sweep Seal, 8ft length

I have three six foot sliding doors that were installed when the home was built in 1998. The company that built the doors was bought out by and production stopped of this product. I believe that it was Marvin. The leaf portion of all these seals are breaking off. The plastic is brittle. Need to repl ... (cont.)

Milgard Casement Weatherstripping Installed 1995 Existing part is in very bad shape. It has a distinct profile. Hadn't seen anything like it. Maybe there is a alternative to this part.

I need about 250 lineal feet of this..

Hi, I hope you can help me. I am trying to find the weatherstipping shown in the photos. The 5th picture is the top of the door which is just a piece of rubber with a kerf. Pictures 3 and 4 are pictures of the strip taken off the door. The other help I need is the side molding. I believe it's what ... (cont.)

Dear Sir/Mam, can you help me identify what brand and model this window is?This window was installed in the mid 1980's. It is a double hung window with thermal pane glazing. The part I need to replace is the [KERF MOUNTED V-STRIP] that forms the weather seal between the lower sash and the upper sash ... (cont.)

Is there a Youtube video showing how to replace this seal?

Trying to replace Milgard casement weather stripping. Like another post early to mid 90s vintage. Any help would be appreciated. Would be 58-055 work? Thanks!!!

Kerf Mount Sweep Seal. The item you sell (58-200) and I bought is 3/8 on the length of the flap. The kerf fit but the leaf part at 3/8 is to short to seal the doors and needs to be 3/4......Do you have the wider leaf? if you don't do you know who does.

I'm looking to get the right door seal for the attached door. The bottom seal that attaches to the door. The threshold appears to be in good condition. It's winter up here and want spend as little time doing project as I can. You help would be appreciated. Thanks

Attached is a photo for my window sash weather stripping. I'm trying to match a profile but don't see something close to this on your website. The overall profile is 5/8". About 1/4" is below the "T". That the part that mounts in the sash groove. The color is white. Jim

need weatherstriping for crestline patio sliding doors

Hi - I am looking for this window seal. I have not been able to locate it anywhere on the internet.

Do you carry the product below?How much per linear foot?

I am trying to find a weatherstripping to replace the rotted vinyl Kerf mounted T slot V seal. If not the same product then suggest a replacement.

I need 24 ft of this example seal

What material is it made of? thanks, tim

Note that dimensions are in millimeters. Need about 36 feet.

We have two bathroom crank style Milgard windows that are about 20 years old with deteriorated seals as shown in the attached pictures. The replacement seal that Milgard sent us is shown on the right in the "detail" picture and the OEM deteriorated seal is on the left so the replacement seal that th ... (cont.)

Dark brown. One pic is I think a leaf seal. Other is 5/26" bulb seal. Both slide in kerf. 1988 patio door. Wood interior/aluminum exterior. No identifying features. Thanks, Bryan

Have a Masonite french door and need to replace the weather stripping on the astragel. See attached pictures. You have something close, the Kerf Bubble seal 5/16, product code 58-053 but may need to trim off the lower half.Have any suggestions?