Viewing all customer Discussions for:

95-245B 7/16" Overlap Screen Corner, Silver Line

I need several of these screen corners if you can get them

Spline inserts are 5/16" thick x 1/2" wide. Corner including flange is 1 1/8" x 1 1/8" square.

We have Simonton reflections white vinyl casement windows series 5500. We are needing to replace some of the outside screen frame corners. I believe the part number is 95-207 but would like your opinion if I am correct. I also want to replace the screen clips on some of them that have broken. I bel ... (cont.)

See photos. Depth/thickness of the piece appears to be 7/16ths. I ordered another product, but it was incorrect and not thick enough. I don't see any markings. Thank you for the help! Is it the 95-245B?

We are looking for this exact replacement. We too purchased the 95-246 but is way too small (does not match measurements online). Our screen frame is 7/16" thick (outer dimension) with an interior opening for the corner key at 5/16" x ~15/32" best as we can measure. Extruded aluminum frame. ... (cont.)

I need four replacement corners. The screen appears to have corners with a flange that rests on the interior of the window surface. The entire length of the piece is 2 and 1/4 in or 5.5 cm. Do you have any ideas?

Good afternoon! Could you help with identifying the type of frame and corner to it? I can't find anything anywhere. I would be very grateful

We believe these are from a silverline 9500 window. We cannot find the replacement corners

Can you help identify?

Can't seem to locate anything that looks like this corner. What other options are available? The frames are approximately 15 years old. Thanks for your help. Ron

do you have a direct replacement for this

I found markings 793A and 793B

Need 10 pieces

There is no name or anything on the parts. It's a corner piece for m screen. I need 10 of these pieces.

Looking to replace the screen corners for my silverline window screens. Any help is appreciated. Thanks,Mark

I need to replace these plastic corner pieces for the screen frames. I need 24 of them. They are all dried out and broken.

Hello, I am looking to replace these screen corners, the # says 793 A in the corner, do you have the replacements?

I originally ordered some corners from you and did not realize there is an offset. After playing with your website I noticed this nice place where I can send you pictures. Please see attached and see if you have them. Thanks.

I'm thinking 95-206 will work, but not sure...the website doesn't show any dimensions. Thanks!

Aluminum frame opening measures about 3/4" by 1/2" (at the longest part). I need a new corner piece.