Viewing all customer Discussions for:

82-086 Legacy Keyed Handle Set, 3-15/16" (1-1/8" to 2-1/2")

Do you know the part # or where I can buy the entire unit?

I need to replace the entire handle assembly, the lock / unlock handle broke. I don't know the model # or were I to buy it.

Hello, Is compatible the set above with my current installation on photos below of my Guardian glass sliding door to replace? Thank you for quick response, Viktor

I am looking to purchase a replacement mortise lock and compatible handle set for my sliding glass door. In my cart currently I have- Multi-Point Mortise Lock with Face Plate, 11" 82-265. I am confident that is the correct replacement lock, what I am not sure of is a corresponding, compatible whit ... (cont.)

Can you tell me if you offer a locking handle that will work with a Jekdwen 2500 sliding patio door? I purchased one from Home Depot but the offset is too great and it doesn't fit. Thank you

On the back of the handle on both side there is a few numbers,on top 2265,us patent 5125703 then D 340398 .please can you let me know which door handle can matches my old one and if 82-086 is a match.thanks for your help

Hi,I purchased this handle set with the 82-227 mortise lock 5-3/8 and it seems to fit just find. However the key is just spinning and not locking. What part am I missing or did I buy the wrong mortise?Kendra

Would like handles to fit mortise will product # 82-086 handle fit my mortise?

The lever on this sliding door latch does not stay on - see attached/detached pictures. I am looking for options to either replace the lever or the entire lock. If replacing the lock, ideally one with a low profile exterior handle would be preferred as there is not a lot of width between the door an ... (cont.)

Hi, I purchase the 82-086 legacy keyed handle set and require additional keys. However, no one in my area seems to be able to match the key correctly -- every key I've had made is too wide for the key slot. Do you have any guidance, or do you sell copies or blanks? Thanks! Christopher ... (cont.)

the lock handle I purchased is correct, its the Amesbury Truth # 82-086. but I did not order a replacement mortis lock for this unit. it seems the one currently in the door is worn out so the lock arm that comes out does not stay in the locked position when the key is turned back to remove the key. ... (cont.)

From the pics I took I believe the replacement I need is a mortise and tenon unit. measurements of it are: length of handle part is 9.5 in., length of unit in door jam is 4 & 1/8in., corresponding part in the lock part of the handle is 5 & 5/8in.I'm a widow and can repair lots of things but ... (cont.)

Is good for patio sliding door 80x 60 American Craftsman

Need this piece and the lock

Bought replacement window seals from you several months ago and service and product was excellent. So I'm hoping you can advise current issue. The small locking device fell off as I was locking the door last night. I managed to slip the part back in and lock up, but I expect I may need to repair/ ... (cont.)

For my current sliding door handle-lock assembly, the distance between the top mounting hole and the hole for the lock spindle(?) is 1 1/4 in. Will the 82-086 lock set work?

Good Evening - First, thanks for your helpful videos and postings on door hardware. Second, I have a broken patio door lock latch. (Fortunately it is broken in the locked position.) The attached pictures seem to match an 82-089 handle system. The problem is, I need only a bronze latch lever and ... (cont.)

Hello, I have a silver line 5800 sliding door, and the interior handle broke. Is there a handle for the interior that you sell? Thank you.

Broke inside part of sliding glass door handle

Will this fit a provia sliding glass door?