Viewing all customer Discussions for:

36-048 2-Bar Hinge Set, 10"

Greetings! I have 4 old Andersen crank out windows and several have corroded at the upper left and right corners where the window slides along the track, to the point where the top of the window drops out of the casement (see 4th photo) Also, installing four new rods for the control arms to slide o ... (cont.)

Hi, i have this window that the crank is broken and the bottom of the window track also seems to be broken for the crank it looks like its the 39-095 can you help me find the track for the bottom of the window?

I have a Loewen Casement Window, about 17 years old, whose gear mechanism no longer works. I'm not sure if there is a tooth broken or the teeth just don't mesh, but I can't really get it to either retract or move out. It is partially hidden by the construction of the window so that I could not find ... (cont.)

Contractor for a glass company here, just can't quite locate this casement arm. Looks to be a Truth #30744B, old one got so rusted that the pivot point where it attaches to the sash rusted off, so just need that pivot arm w/ rail.

I would like to find a replacement part for the photo.

The subject linkage is from the left side of my casement frame. The part that slides into the track has been damaged (the plastic has broken off). The window was made by Hurd Millwork Co.

Please help us identify and order the attached lock and crank

Hello there, my name is Howard, I like to know if you have something like this in your inventory or know of a replacement. It is from an older home likely built in the early 40's wood casement window. The brass rivet? broke and am unable to repair the hinge. Thank you, for your help. Howard ... (cont.)

long side is 10" end to end (stamped 18D710S) short side is 9-5/8 end to end (stamped 18 1) bar is 1/2" wide - 1/8" thick

We have several windows that won't shut as the crank seems to be stripping. We've tried new crank handles and that didn't fix the problem, so I think it's the internal component that stripped. Can those be replaced?

Looking for these hinges

Hello, I am looking to identify a replacement part for a Weathershield window from the early 2000's. The 3-hole stainless track is 10 inches long with an "L" stamp. The 2-bar hinge is 7 5/8 long with four holes and a "60" stamp. The other bar of the hinge is 5 7/16 long with a "6DN02" stamp. The sli ... (cont.)

The only part I need to replace is the crank and handle, everything else works well. I just need to know which part to order?

Hope you can help me with this operator. White Truth operator. As per diagram, the swing arm that connects to the sash is 4 1/2" on center and the mounting clip is on the bottom. It also has a upward bend.

I need a truth casement window lower hinge arm assembly

We just replaced the glass and weatherstripping in our ~3 ft square Certainteed casement. We thought we'd successfully reset the sash, but on its 2nd open, the bottom sliding clip on the hinge attached to the sash was partially in and partially out of the window's track. In trying to release the win ... (cont.)

Need 3 replacement complete operators with handles, covers, bottom track and track follower. Vinyl window; white hardware; thank you!

Good evening, I need two operators same style but one each for a right and left opening window. See pics above and let me know if there is anything else that is needed. Thank you, Gary

The strong winds have broken my window hardware and I am looking to replace the whole thing. I don't find any part numbers . Only TRUTH. Can you help ? Thanks !

Can you please identify this setup? Lefthand portion of double casement window. I need tracks and top and bottom hinges. Stamp says truth 30744. Please help asap.