Viewing all customer Discussions for:

36-004-14 14" Stainless Steel 2 Bar Hinge Set

looking for 12" Four Bar Hinge, Standard Duty. Can I use Product Code: 36-021-10" Four-Bar Hinge, Standard Duty instead since Product Code: 36-022HD is too thick?

Two numbers on the slider bar 32062 31861

Hi! I have a few of these. one the operator is broken and another the pivot slide is broken. I think I have identified it as these 2 but I wanted to verify. thanks! https://www.swisco.com/Pivot-Slide-Assembly/pd/Replacement-Window-Operator-Accessories/39-536 https://www.swisco.com/encore-awning-oper ... (cont.)

Working on a house i believe was built in the late 60's and windows appear to be original however cannot find any marking or part numbers of any kind. Any help would be appreciated

Can you please see if you can match this with what you have. To the best of my ability 38-239C looks like the design of the hinge, but not sure of the crank and handle part. The guides on the side of the window measure 12". Thanks for your help in advance

please help identify this part.

Dear Sirs,I am trying to locate window hinges stamped interlock maxsash which are 300mm long x 30mm wide approx. the bottom and top hinges are handed top &bottom and not interchangeable, the window hinges are on approx. 40 year old wooden windows.Can you please assist in finding this item if pos ... (cont.)

Greetings, we have several casement windows as shown. The hinges have failed on one and need to be replaced. We also need screws as the old ones are badly rusted. We prefer stainless steel parts if available.

Looking for casement hinge and window bar/slider. Windows are Milgard casements. Arm on hinge reads 40986. Have given lengths in photo. Where hinge mounts to frame, appears to be a sandwiched configuration. Also need bracket mounted to window, where hinge mounts. This is the bottom bracket, camera ... (cont.)

Hi, im Hakim from Malaysia. where can I get this interlock set for window 8inch (12C-IS23 OE) and also 16inch (12C-IS43 GL)

good day I live on the VA Beach which is heavy in Salt air. As you can see, many of the parts are terribly corroded. I could not find a brand of my windows but in the one picture you can see the only label that I could find. can you provide replacement parts with these pictures? Appreciate your hel ... (cont.)

Dimensions: On frame - 14"; on sash - 7 3/4" Link arm - 11" 14E117S stamped on link arm followed by a 'V' formed by 3 squares See photos. I have not removed hinges yet, but want to replace them because window sags.

These windows are near the ocean in Hawaii. The hardware is rusted and in one location it's turn the plate under the crank into a powder. Any replacement hardware would need to be stainless. When looking at the photos, the photo of the casement hardware shows the weathering of the plate I menti ... (cont.)

Need to replace basically all of the metal components of this window. 8A0442HGSS was the replacement part number Milguard gave me for the hinge. HA6702SK or HA0013SK for the striker plate Would also be good to replace the crank handle assembly if available

The black piece on the right side is split in two. It's supposed to hold an arm in place while it slides on the track. Can i finf the black plastic piece by itself or do I need the whole track? I can go either way.The black piece is broken in two. It's the piece that slides in the track. ... (cont.)

I need a left and right of this assembly for

I put the actual measurements of my window hardware. Additionally included is the photo of the mechanism which goes through the window that I need for both windows too -it measures 5"

The brackets and arms that hold the window in its frame have broken. The window can no longer be opened without the window falling out. I haven't been able to take the window out to remove the hardware. I need another person to help. I took photos of the window in place and measured the brackets/ ... (cont.)

I need help identifying the replacement parts for these dual arms. Please let me know if there is anything else you need from us to identify the parts.

I have casement windows and the bytom track is rusted away and I need replacement hardware