Viewing all customer Discussions for:

36-004-14 14" Stainless Steel 2 Bar Hinge Set

Milgard awning window side bracket rusted out. Its 3 piece - the piece screwed onto the frame is 13 3/4" (stamped #32371), about an inch (15/16) from the bottom is an 8" 'traveller' piece (stamped #30127) which connects to a ≈6" piece (no #) that screws into the facing side of the window. C ... (cont.)

I have seven paradigm windows. They were installed in 2006. C-Lc60-24x48 Original Owner 5 open on one side, 2 on the other. Series 8351. The bottom hinge arm is rusting. Is it possible to purchase a single arm hinge set for these windows. the hinge arm is 10" long.thank you!Jerome ... (cont.)

I require a replacement upper hinge for a Truth brand window hardware.It looks like I need a pair of hinges PN: 36-004-10 or PN:36-004-14. Mine is actually 12" on the side that attaches to the window sill.I look forward to hearing from you.Be Safe,Paul

Have 2 bathroom crank out windows that will open with no problem but when closing they will stop with a couple inches left before completely closed and the crank will just turn as if stripped. Not sure what part may be needed to fix. I have enclosed a photo of what the arms look like but not sure ... (cont.)

Looking for casement window hinges. the longest side is 12" (on the sill). The arm attached to the window is 7" and the connector is ~6 3/4". I only see shorter (10") and longer (13"). Please see photo.

Good morning.I have some older Certsinteed Windows. The warranty sticker reads "October 1999."Casement Windows. A recent Home Imspection has revealed a pattern of failure with the hardware on the bottom of windows which allows the window to track open and close. The hardware, shown in the photos, ... (cont.)

While open the window was struck by a riding mower. The small black part that holds the crank mechanism in the channel rim was broken as was the small metal piece with the small bend in it to fit under the channel where it rides or travels in. Can't find anyone to repair and replace this window par ... (cont.)

I think I need the "L" shaped part. When I close the window(turning the operator counter-clock wise), it does not close completely. Something is stuck at the end of the closing cycle, so the window does not close tightly. The window is still open about 2 inches. That is all I can do when I close th ... (cont.)