Viewing all customer Discussions for:

36-004-14 14" Stainless Steel 2 Bar Hinge Set

Nami narcotic 100/200 hi-1, Rating nfrc Series clcase MST 2650 Nfrc HII-1-006-7/14-15 97-M We need replacement bracket for our window above.

I need some hardware to replace in casement windows. Long leg is about 8" . Short leg about 5".Six windows total. 3 left and 3 right. Crank handle has a bird on the end. I appreciate any help you can give me.ThanksStephen

The piece I am looking for is like your 36-004-10, but 13 inches vs your 10 inch.The Truth equivalent, but in 10 inches, is EP or TH 23088. Need a top, left onening.I need a 13 inch equavilent. The plastic shoe broke on mine. I have a Truth 13 inch, three piece concealed casement hinge with a brok ... (cont.)

Need these hinges

I need upper and lower assembly for Truth encased single window. Measure 13 inch mount to window frame Thanks

Hi, I measured the hinges and the actual measurements are 13 inches by 7.25 inches. The 14 inch hinge you list has measurements of 14 inches by 6.75 inches. Will this hinge work or do I have a different hinge? Just wanted to follow up and make sure you got the message from your colleague at SWISCO ... (cont.)

I need to replace the upper and lower rails on my Lansing casement window. The adjustment cams just spin so I can't get the window to fit right. I'm having trouble finding the replacement rails. The upper is 13" long and bottom is 12" long with a black stop at the end that adds an inch or so. Th ... (cont.)

Hello!I am looking for replacement Stainless steel hinges for my windows. I currently have 13" Truth Egress Casement Hinges (Truth 14.12). I have attached photos of my hinges below. I do need stainless steel due to coastal application.Thank you!Kimberly

The piece of the hinge 30140 that goes into the track 32877 has broken. I need Trust Part number 30140

One photos the bottom where the operator goes but I don't know what it needs. The other photo is the top of the same window. Thank you!

I have a rectangular window, long side is up & down. Outside dimensions 52X27 and inside 25 2/8 X 49 2/8 . Is a 2 pane Vinyl window. I need to replace Brackets, Casement Operators and Tacks. Pictures, attached. I am not familiar with the names of what I need. I looked at your web site to see what I ... (cont.)

I'm hopeful you can help with this. I am looking for this type of hinge for a pair of wood windows.

Hello, I'm working with a homeowner with casement windows built with truth hardware that has rusted out from being in a coastal environment. I would like to order replacement parts and was looking for parts that would stand up the best in a coastal environment. Attached photos show parts with the ... (cont.)

CAN YOU PLEASE HELP ME FIND THIS ITEM FOR THE UPPER AND LOWER PART OF MY WINDOW?I ONLY SEE 6 3/4 INSTEAD OF 6 1/4,THANK YOU

I have two windows not closing properly. One will not close far enough to use lock mechanism, the other window will shut on the lock side but the far side pushes away from sill.Once we figure out what I need I would like to by two sets of hardware. If I get them installed properly I'll probably buy ... (cont.)

I have older Truth Windows that I am looking for complete replacement of the operator, latch, hinge and fasteners, but I am having a hard time finding the exact match. I have these numbers on my current parts: Hinge: 40986 - it measures 13" in length with a 6.75" top bar. I cannot find any that mat ... (cont.)

I need to replace operators on casement windows. Photos attached.

Milgard awning window side bracket rusted out. Its 3 piece - the piece screwed onto the frame is 13 3/4" (stamped #32371), about an inch (15/16) from the bottom is an 8" 'traveller' piece (stamped #30127) which connects to a ≈6" piece (no #) that screws into the facing side of the window. C ... (cont.)

I have seven paradigm windows. They were installed in 2006. C-Lc60-24x48 Original Owner 5 open on one side, 2 on the other. Series 8351. The bottom hinge arm is rusting. Is it possible to purchase a single arm hinge set for these windows. the hinge arm is 10" long.thank you!Jerome ... (cont.)

I require a replacement upper hinge for a Truth brand window hardware.It looks like I need a pair of hinges PN: 36-004-10 or PN:36-004-14. Mine is actually 12" on the side that attaches to the window sill.I look forward to hearing from you.Be Safe,Paul