Viewing all customer Discussions for:

36-004-14 14" Stainless Steel 2 Bar Hinge Set

Could you please help me identify the arm I indicated in the attached photos? It's approximately 7-1/8" inches long (when I include the missing peice that rusted away). I found the correct accuator (39-221B) on your website, but I'm struggling to find this one. Thanks!

I need replacement hinge for Vetter window - home built in 2002. Window cranks out from left to right with full extended window on the right side. Metal piece on the bottom of the window that attaches to the hinge mechanism rusted off (home is on salt water) so I need to replace the whole hinge mec ... (cont.)

Need 14 inch track

Length is 7-1/4 and the bar that pivots is 7-3/8. Markings from Truth on old one, 31858.

I need a top guide for a casement window

Please see attched photo. I need to replace rusted / busted side hinges on Milgard awning windows. The side bracket is 13 inches long. The arm I can see is 7 inches long. Please let me know if you have a part that will work. i need sets for two awning windows. Thank you.

Need to replace top and bottom's due to corrosion.

Hi there! Our whole house has New Castle Casement Windows by CertainTeed. I am needing replacement hinges for various size of windows. This is an example of what I am looking for.

I am looking for replacement parts for casement windows. I hope that you can help. The rail for the operator has is 14.5 inches and these are for windows with hinges on the right. The lower hinge for the left hinged window is stamped 32062, but I need hinges for the right hinged windows as well. Tha ... (cont.)

I bought this item, but it doesn't work. This 2-Bar Hinge Set is 10". I need one longer with 13 " to replace mine as it is broken.

I will need additional parts, the vertical pieces for hinges right and left are 17 inches long The diagonal slideing pieces are 10 inches long each. Would also like to replace the latch parts if possible

I need to find out all the hardware that has this kind of window.I know the brand is Thrth, I already ordered with you Encore Awning and Window Lock.Thanks.

The non rusty hinge is on the right side window the left side has missing parts I would like to replace them both the right side has the number 31858 stamped in it and the window is about 15 years old model ca-440 The base of the hinge is 13 inches. The bar that goes on the window is 7 3/8 inches an ... (cont.)

I need parts for some Milgard windows - hinges and connect arms, and brackets. The part numbers for the hinges/connect arms is "HA0438TK 64XX/5421 TRK & SLDR ASS'Y EG". I also need the brackets on the vertical inside of the windows. I've attached photos with red arrows or red lines pointing at w ... (cont.)

13" long piece and the two other pieces, that are somewhat warped, appear to be 7" in length.

Approximately 20" wide casement. Looking for both upper and lower arms.

Believe that I have a Milgard window and looking to replace the rusted operator

This window fell out when I opened it, and I'm trying to identify what hardware needs to be replaced. The parts are made by "American Metal company." Thank you!

I need to replace the metal horizontal and vertical pieces that pushes the Milgard awning window out. Can I get that part number as it is currently rusted. Thanks