Viewing all customer Discussions for:

39-253LB Encore Dual Arm Operator, Sill Mount

Need replacement operator.

Truth operating arm looks like 39-253LB. I can't identify these 2 small brackets that we're screwed to the under side of the PGT window Any idea what they are?

Hi,The casement window crank doesn't open very well. The gear is worn down so the teeth don't grip. The window is a Simonton. I've got two of these windows that have this issue and the other one is just the reverse opening direction.Thanks,Eric

looking for 2 left hand and two right hand of pictured crank mechanism

Hello, thanks for running a great web site! I hope you can help me: I have large Mira Premium casement windows (about 70x24 in. Many of the operators are rusty or their adjustment screws inoperable. Many keepers are broken because of excessive force applied. I was able to identify the keepers as Tru ... (cont.)

I'm looking to replace four broken window cranks but don't seem to find the exact match. I've included a picture.

I ordered few days ago this part 2209634 is crank mechanism but I did not came in full I missing the part that goes to the window and the little robber to catch that part with the part that goes on the frame of the window in other world the crank mechanism.

Hello, I'm looking to replace the window crank sets, covers, handles, and locks for a right swing and left swing window all in beige. Thank you! - Amber

Are you able to help me find this armature? I need a new crank and arm piece.

I AM TRYING TO LOCATE TWO REPLACEMENT WINODW CRANK ASSEMBLY FOR A CASEMENT WINODW AS SHOWN IN THE ATTACHED PHOTOS, THAT OPEN THE LEFT AND RIGHT WINDOWS. THE ONLY MARKING ON THE OLD CRANK ARE NUMBERS:40447 AND 41012 AND A DATE 11/19/01. Other part # 31876,41012,40447 truth hardware.I just took out th ... (cont.)

Truth casement window operator The only number on operator is 31876

I am looking for a match for this Truth dual arm operator. Please see the picture with the measurements. Thank you!

Can I use the 39-253RB as a replacement for the casement arm as shown in the pictures? Do I need extra parts?

Something is striped on each window I can manually open each window about 3 inches then the crank will work out and in but it won't crank it to close the final 3 inches.it looks I need a dual arm right and left.I hope your able to help

The arm attached to the bottom of the window has rusted to the point it crumbles. No identifiers on window or crank arm assembly. The window was put in approx 20 years go.

The window crank becomes disengage from the window track guide there at the longer end, as if there is some type cap that is missing from the tip of the crank that is inserted into the window guide. If there is a replacement guide that for the bottom track of the window that can be replaced please i ... (cont.)

I need a whole new two point locking system with a 15" bar. Also the plastic clips that hold the bar in place. I also need 2 lh operators and 1 rh operator.

Trying to replace a Milguard Operator,part# HA-043-OP-SS-WH. Crank is on the left side from inside home

I have a window that needs to have a new crank window opening. It appears that the gears are striped and just clicks as you get closer toFully closing the window. In the winter it is really hard to manipulate it to a close position. Can you help me with the replacement parts?P S. Our home was a new ... (cont.)

Righthand opening. Truth brand. I also need information to order the lefthand version of this. Thanks!