Viewing all customer Discussions for:

39-253LB Encore Dual Arm Operator, Sill Mount

We need to replace Truth operator #14D800P. There are 4 lefts and 2 rights. My question is the arm that goes into the track must be a square guide to get into the track and does the handle cover and handle come with it?It looks like I need two 39-253-LB, four 39-253-RB and six 39-529. I would also ... (cont.)

There is a # 14D500P ,or it could be 140500P.Hurd window.

Hello, I received my order but the don't fit to my application. Can you help me get the correct ones. I've attached pictures as directed. Thanks, John

Would this be? 39-341 39-352 39-232 36-048

I'm the property manager for Altia and we have a window that is missing the entire hinge/bracket/handle on their window. In the pictures below are all of the parts we need (from a similar window). All the metal hardware + the handle and cover are needed. Can you please help me identify the p ... (cont.)

I have a window that will not complete crank to close position (photo 2). Photo 1 is taken from inside room looking down on mechanism. Photo 3 is taken from outside house looking at mechanism. Gear looks warn at arm. I am wondering if this is the problem. Photo 4 is looking at the window fully ... (cont.)

Need a quote for 4-6 left side and right side white casement hardware to ship to Colorado

Please let me know this or a comparable part is available. Thanks

The gear wheel on the outside (shown in photo) and probably inside the housing (can't see it) are stripped on 3 of our 14 casement windows and we would like to replace them. We haven't been able to open them for several years because we can't crank them all the way closed without going outside and ... (cont.)

Hello, Trying to find window operators & Entry Gard made by "Truth" Model 31858 Please let me know if carry you the specific model or a compatable one.Both right and left operators. Thanks

I'm trying to change the worn out window operator on our 2000 Milgard windows. Your model 39-253 RB has same dimensions. However on mine, I can not take the cover out. The cover you sell is about 1/2" wider. Is there another model I should look for or should I order the operator plus a new cover/han ... (cont.)

Hi,We have a casement window with a dual arm operator that has worn out. It is difficult to tell what brand the window is. It has a logo with a letter "A" and two underscores. The crank portion of the dual operator arm has a code 1491-120 B. The long arm has code S-1491-160. The short arm has code ... (cont.)

I need to replace several sill Mount window cranks. I believe the 39-253RB is the correct item. However, the product I am replacing has the handle, cover and crank all integrated in a single unit. I have ordered from you in the past, but when I try to reset my password the link you send tells me i ... (cont.)

Do you have this style ? There are no labels on the windows to identify the manufacturer.

Please check my order # 2116263 to verify that I have the right parts for both 2 right opening windows and 2 left opening windows.The top sections are fine - it is the bottom arms and slides.Thank youJeff

Damage crank

Please provide a part # for casement Left, Right And Awning both stainless steel if available along w covers and cranks please

good day I live on the VA Beach which is heavy in Salt air. As you can see, many of the parts are terribly corroded. I could not find a brand of my windows but in the one picture you can see the only label that I could find. can you provide replacement parts with these pictures? Appreciate your hel ... (cont.)

I need to replace the sill crank arms and top guides and whatever is need to repair these windows, I think Viwinco is the make. They are 10 years old and a bad idea especially for a house 3 blocks from the Atlantic Ocean. I saw a parts fir the bottom but not the top. I would greatly appreciate any ... (cont.)

Need to replace several openers, both left and right. Stamped with 14D801