Viewing all customer Discussions for:

39-253RB Encore Dual Arm Operator, Sill Mount

I see part number 14D999P and it looks like a dual arm operator to me. thanks for your help

I'm helping a friend get his house ready to sell. His front window, will open fine, but you need to pull on the window and crank the handle to turn. Looks like the gears on the regulator are very worn. I believe the it is a Minnkota window. It is a large picture window in the front of his house ... (cont.)

This operator got a bit "sloppy" and I was able to adjusted with a hammer. But I would like to replace it . The long arm is about 11 1/2 inches long. That's about what I know.

Looking to replace this window crank. The gears on the wheel are stripped. It is a 25 inch wide window that opens and closes and 27 inch frame.

The mechanics work fine however the spindle that holds the crank snapped

I need help replacing this gel when crank for a casement window on the part itself it says 32062. My name is Andy

Hello! Not sure the make of this window, hence the search! Hopefully the picture is enough. Need a new gear to open and close the window since the current one doesn't grip enough to close. Thanks!! Dan

Need replacement operators for 4 windows The length seems to 10 3/4 inches. I think.

Looking for a replacement mechanism that open and closes a casement window. Window measures 31". Also I need to fix the locking mechanism. Thank youChuck

My part matches your measurements from your piece in the website. Could you please let me know if your part it would work. A number in the short arm is 31876 and the long arm is 41011. Thanks Jorge

Do you have a replacement part for this Milgard casement operator ? The windows are vinyl and are about 20 years old. Please let me know. Thank you Rick

I need to replace 2 window cranks and I need help identifying the correct brand and parts I need. The crank will open the window and close the window about 75% of the way before it stops and the handle just spins without finishing closing the window.

Hi, I'd like to replace all the hardware in two Simonton windows that are 51"x28". Pics shown here and also the cranks. Thank you Jeff

I need to replace this operator. Any idea what part to order?

Hello. I am unable to find replacement for this unit. I have 4 of them with same issue. I am able to open them - but I can't close them within 2 inches of the opening. It just continues to click and would not move. I need to help to shut it. Thanks Boris

Part is stamped Truth, 41011. I located it in the Truth catalog but without the flange rivited to the short arm, and without the glide rivited to the long arm. Can you provide a replacement complete with the added parts?

Replace right hand and left hand operators Part numbers on operator arms 9D501; long arm 51014; short arm 67813

40987 Looking for replacements Thanks!

I could use some help selecting the proper part from your website to replace these window operators.My customer has six windows that all have strip gears on the operators.If you could help me identify which part I need to order I'd like to place an order for them.Thanks! -Joel

Looking for 2 of these.