Viewing all customer Discussions for:

39-239B Encore Awning Operator, Sill Mount

Looking for 2 large awning roto operators

Hello, Can you please help me identify the correct operator? Thank you

Hello, We are looking for a window operator as shown in the photo. Please advise if you have this part available.Thank you!Kevin

I need to replace my window operator but not sure of the correct part number needed. Please see pics. I was on the Swisco website and found possible replacement parts: 39-239B or 39-239C. These windows were installed in 2004 Please advise. Mahalo. Russ

Looking to identify this operator for an awning window we are repairing. Thanks!

I have three operators that are stripped. The horizontal opening window is a Truth #41016. The two (2) right opening windows are Truth. #41011. Arms are a dark color- probably black. What is the trick to removing the screws from the operators as they are under the sash area? Is there a special ... (cont.)

Hello, Can you help identify 2 parts: 1) crank mechanism - for one of my two windows it's missing 2) handle for crank mechanism - for two of two windows I need replacement Thank you.

Sir, Do you stock these?

Included in this message is 1 of many parts needed for me to replace old parts. I'm not sure if this is a serial number but 101499 is printed on the part.

Looking for casement window crank and crank handle. Ned two of each part.

Looking for replacement crank assembly for casement window. Crank is 2 scissor style, dual-arm, Truth brand hardware, and Opens rectangular window outward, from bottom (window hinged across top). Vinyl window has ~1/4" wide frame, through which crank is mounted to outside of sill. ... (cont.)

Recently servicing our rental and tenant reported the window mechanism had come off. On inspection the ends are sheared. Is there a replacement available? The pivot handle is working and the window opens freely

Hi. I need to find replacement operator for Milgard Styline Awning windows. Pics of operator in place are attached. Scissor at widest is about 7". Please let me know if you need more info. Thanks,Mike

I need about 4 of these if you have them. The first part of the arm is about 4" long, the second part of the arm is approximately 11 1/4" long. The overall length is approximately 15' long. The crank housing is 4 15/16" wide that fits into the window frame itself. I hope this helps. ... (cont.)

The black plastic part is cracked for another type of Milgard awning window as shown on the attached photo. Do you carry this part?

I broke out the pin at the end of the scissors type operator on my awning window. I need new pin and clip and looks like there is a sheath type thing on the window itself. See photos.

I have a 22"x22" casement window with a dual arm where the plastic attachment/s from the tips of both arms connecting the plastic attachments located on the bottom left and right of the window has partially broken off Not quiet sure what parts I require? Thank you for any help,

We live by the beach in CA and our windows are always open, the salt air ate away at these operators and I'd like to replace them. I likely need the track slides as well. Can you please help me iD these parts? I'm pretty handy and can definitely install myself.

As you can see from the pic, one of the arms has sheered. Overall length of extended arms, just over 14". Don't know what window type contractor put in during remodel.

Looking for a hinge like this for 2 windows. They are about 2.5x2.5" this is a different slightly larger window but the hinge looks the same