Viewing all customer Discussions for:

39-448 Tie Bar Guide

Looking for this part for my Dashwood Casement window. Used to keep locking rod in place. Plastic clip fastens to window frame and has a loop in it. Loop is missing from the piece in the photo.

i am looking for this plastic mount for the locker. the window is a 770 case window, its 6 years old, the locking rod goes through this parts

Most likely from the late 80's Winged Tie Bar Guide ?? Window imprint stamp says = WS-U IGCC reg CBA 12 Latch is on the left - right side swing. The metal bar has three circular nibs on it and they catch the plastic holders on the window itself. And then the plastic on the side window sill is what ... (cont.)

Need bolt to hold on locking bar.

Hello, I need a Truth window casement operator. I also need the plastic part that anchors the locking bar that moves up and down when you lock or unlock the window. Please see the attached photos.

I have a right hand casement window that isn't operating properly. The gear in the crank housing doesn't stay in place and slips out of position. Also there is a nylon guide for the locking mechanism that is missing that I need to replace. (I've included a pic of the left hand nylon guide) The only ... (cont.)

Looking for replacement tie bar guides for Crestline casement windows. Thanks.

the plastic guide broke and the bar does not stay in place to lock in the window after cranking it into place. The window type i have is a casement window. I ordered a Right hand lock handle assembly for it in 2010. The part is listed as a NCCASE NEW CASTLE CASEMENT and the part number was 301323 ... (cont.)

Can you please help with replacement part? This holds bar inplace for casement windows. Thanks

I have 2 identical casement windows, but on one, the lock bar and operator are missing. From the other, I took these photos. I didn't have a tape measure with me, so for size, I held am 8.5 x 11" piece of paper next to the hardware for scaling. It appears to me that I need: 1. A lock bar with 2 ... (cont.)

Hi There, I would like to replace a few plastic tie bar guides, but is very hard to find something similar. Is there an equivalent part that can replace it? Thank you !

Looks came for the height of war of window

Window information: Hll-280-1 NFRC Series: CLCASE WindowThere are two different clips, I need the one in the picture.

Looking for some parts Weather shield windows

Can you help find this Truth Hardware tie operator: 3 Cyllindracal roller (middle roller more or less centered in the middle between the other two rollers) 34.9 inches length *It is not part 6-1481-35-3 as middle roller is not centered. What type of Truth Hardware operator is this? The photos show ... (cont.)

The 1st pic is the broken plastic piece. The 2nd is the not broken piece. There is a metal rod that slides up and down and secures the window

1402 Truth DEAL window made in India

hi there, do you have this plastic parts. thank you.

I dont see any part #'s on the window or guides I noticed my window was not shut all the way when I opened it the bar fell & the window wont close & lock now.

this part is one of three that holds the long sash lock(?) Bar. One is broken but I may want to replace all of them. It is approximately 2.5" wide and 1 and 13/16" long.