Viewing all customer Discussions for:

32-060 19-3/4" Self-Closing Drawer Slide Pair

I am looking for replacement drawer slide for the provided photo item. Also, individual rollers, if possible.

Very similar to your part number 32-040 Except the roller is on the opposite side.

I am looking for a replacement Merilkat side drawe slide with the L shaped end. Do you know where I can find one?

These pictures are from a drawer that still is working. We need these 2 glides to replace ones on a drawer that no longer works. If these pictures don't give you a good idea, let me know.

I have a 21.75" drawer with Unigrass 6600 slides and I need to replace the slides and the accompanying cabinet rails. The cabinet depth is 23.5". Please recommend what replacements I need. The existing cabinets have a plastic rear Mount extension bracket. You can see the rollers on the existing ... (cont.)

This drawer slider has lost the retainer that holds the wheel in place.This is the slider fastened to the wall on the right side of the drawer. It is approximately 20 3/4 ". I saw one on the website that says 21 5/8". Is that the size I need?

Hope you can help, we need both lengths drawer glides 17-3/4 & 20-3/4. 4 sets of each. also need 8- 1" plastic spacers to hold glides at correct width

Unable to find plastic guides on cabinet where plastic drawer goes. Unfortunately I am unable to figure out how to attach the photos I took because I can't find this message when I return from photos

For kitchen cabinet drawer. Need the opposite side roller assembly. Right side when face drawer front.

currently have only the drawer insert in attached photo, want to add more using the 32-062 glide

Looking for the hardware that match these items. The slide on the drawer itself measures just over 22 3/8 inches. The slides that are attached to cabinets measure just under 23 inches. Also need the same hardware with measurements of 19 1/2 inches on the drawer and just over 20 inches on the cabine ... (cont.)

Drawer slide has an NL CO stamped on end.see photo.Slide is 21".From a Quakermaid cabinet. Probably 1968

Trying to find replacement hardware like this or similar. Must have a back bracket to attach to the back of the cabinet

Hello I am looking for these parts, both left and right sides. The side rails are unigrass 6600 series and measure 19 3/4 inches. I also need the back holding bracket both left and right the bracket moves back and forth left to right with markings on the back that say pat's 5.359.723 and 5.349.723. ... (cont.)

Tried numerous other ones and the bracket keeps the drawer from closing the whole way.

I need 4 back plates. Info on the piece Mepla 543.000.30.02

I have slide measures 1 1/8 inch wide has a lip goes to 3/4 width without lip need plastic rear mounts

this was put in in 1983-1986 on the drawers in a apartment kitchen,

Hi, can you help me find replacement parts for these damaged parts? Thank you, for all your help.

Hi the slider on top is 19 5/8", the one pictured on the bottom is 19 7/8". They are both white. can you identify a replacement part. Thanks for your help