Viewing all customer Discussions for:

32-061 21-5/8" Self-Closing Drawer Slide Pair

this is for epoxy coated side mounted slides. it mounts into the 2 holes in the back of the cabinetW= 1 1/8L= 1 7/8slot for slice= 7/8pegs= 1 1/4 on center

I have some Houck 70CL 22 inch slides on my kitchen drawers, probably installed some 30 years ago. The back brackets are breaking. The current bracket is around 1 & 1/16 inch wide and about 1/2 inch deep. Would you have brackets that would fit these old slides?

I have a set of kitchen cabinets, utilizing the hanging drawer brackets, similar to your part 32-094 (Mine are about 1 inch deep and labeled 'left' and 'right') I am missing the left hand slide that attaches to the cabinet and hanging drawer bracket. I measured this bracket that is on the right ha ... (cont.)

I am trying to replace Unigrass 6600 550mm drawer slides\rollers. Will Product Code: 32-061 be a suitable replacement? Thanks, Kris

Hello, wondering if anyone can identify these and if they're still available? Thank you, David

Do you have this style slider drawer glide- 22 1/2??

Does the 32-018 work with the 32-061?

Unigrass 6600 slider and adjuster needed.

I found the part number for the Grass Adapter brackets, but I can not find the Draw Slides that I need.

no markings on any of the three pieces. The third piece is the one glued in the back of the cupboard that supports the stationery slide. These pieces do not attach to the wall. There is a space between the slide and the wall

Will these lock in place so drawer won?t slide out during travel

HelloI am Having difficulty finding the replacement bracket from my cabinets that were installed in 1995 it is a euro type the length is 2 1/2 inches and the width is 1 1/4 outside with in 1 1/8 inside width. Do you have this part? Thank you so much for your help.Dina

The slide is 20-3/4" long. I need a pair.

Hi all, could use an assist with this one. Need to replace a broken kitchen drawer mount. Slide opening is 1 1/8" Everything I've found is much smaller.

Slider on the drawer side of 5 drawers were bent and hard to open. Existing sliders have a smaller roller/wheel. Hoping to find a replacement for the drawer so I do not have to replace both sides. Cabinets were installed in 2004 There are no markings visible on sliders. Appreciate any assistan ... (cont.)

Hi,my name is Singh and I am looking for that plastic holder clip which is holding drawer side rails for the drawer. Can you guys let me know if you guys have that plastic clip part.

I've been to several hardware stores trying to find a drawer glide that will work with drawers in my kitchen that have had the glides break. I need a glide to mount at the back of the opening which will support the track that holds the drawer. I've attached some pictures to give you an idea of wha ... (cont.)

2 1/2 in. Long 1 3/4 in wide (kitchen). No Model #

I have ordered several replacements and not have been the correct size. The issues I've had is they are too narrow for the slide to get into the bracket. There is no markings or any identification on the part. If you could help I would appreciate it.

This opening for the slide to fit in is 1.25" All of the new ones I find at hardware stores are 1" or 7/8". Can I find this size anymore? Cabinets are about 20 yrs old