Discussions for 82-030 : SWISCO.com

Patio door handle

This is a patio door handle for heavy hurricane windows. Black in color the handle is 9 3/4"tall, 1"wide, 5/16"depth. There are 2 screws one is 3" from top of door handle and second screw hole is just about 7" from the top of door handle. The 2 screws are 4" apart.

+1

Do you sell a replacement handle for this door?

SD-R25-1829X2023 (72x80) I need a replacement handle for this door (or a service to replace the handle. I cannot find any other identifying information on the door.

needs door handle.

ordered a few parts here but no luck. i have a SGD-R20-143X95 Series 1000 sgd P.L# 043-017 conforms to cmbso. we need the door handle and lock keeper. please help.

+1

Do you sell a mortise latch that will fit my Guardian door?

Hello, our Guardian patio door handle broke so I purchased a replacement. However I can not find a mortise latch that will fit. The inside opening measures exactly 3 inches yet most commercial mortise latches measure 3 15/16 etc, always a touch bigger than 3 inches. Where can I find a replacement? ... (cont.)

Replacement slidding door handle

Hello, and thank you for helping me. I am almost sure your legacy handle is what I need to replace my broken part. Mine does not have a lock. I need the handle and the part that goes inside. Measurements look accurate too . Just asking you to look at my pics for your visual thoughts. ... (cont.)

American Craftsman 50 Series Door Handle

Hi, Within the last year I purchased an AMERICAN CRAFTSMAN 72 in. x 80 in. 50 Series HVHZ Approved White Vinyl Left-Hand Sliding Patio Door with Blinds from Home Depot. The slider handle did not include a lock. I would like to either add a lock to the existing handle or purchase a new handle with t ... (cont.)

BF Rich Latch

I need a replacement latch for my BF Rich sliding glass door. The door was installed in 2016. Attached is a photo.

Sliding patio door handle .

I need to replace the sliding door handle. I do not have a manufactured name.

+2

Sliding door hardware lock

Looking for the this if you have it ? Both broke

Patio sliding door handle

Can you help identify a replacement handle for the patio door in the attached photos? I need the handle to work with the existing lock mortise if possible. The door thickness is 1-3/4". The lock mortise measures 3/4"w x 6" long. The screws that hold the broken handle are 3-15/16" on center. ... (cont.)

5500 /5700 series lock

Hi. Can you please tell me which lock belong to 5500 5700 for 18 years old sliding glass door?

IWC BEIGE DOOR HANDLES REPLACE

Need the mortise for the 82-030 handles

+1

sliding glass door handle

Need a sliding glass door handle comple for the one pictured.

+2

Broken Mortise Lock around top and bottom screws/latch is not locking

The toggle is not moving the lock to latch anymore. It also appears the mortise lock top and bottom have partly broken off. I can't find a mortise lock that matches these measurements. It appears to be a Legacy handle set.

Doorwall handle set

I need a complete handle set like I've shown.Is it possible to get this?RegardsMichael

Door Handle Replacement

The only window manufacturer information I have is located on bottom left portion of sliding glass door. AFG Temp 5366 16 CFR 1201-CII ANSI Z97.1-1984 3/16U SGCC-1663 Looking to find a door handle replacement for this sliding glass door. Been giving us headaches for a year! Any help would be gr ... (cont.)

Replace latch mechanism

Able to tell from these photos which latch might be a replacement?

Replacement Mortise Lock for Fleetwood Sliding Patio Door

Does anyone know which parts I should order to replace this mortise lock? It's roughly 3 1/4 x 1/2 inch and it's all rusted out due to being near the ocean so it doesn't open and close easily any more.