Viewing all customer Discussions for:

82-090 Legacy Handle Set, 3-15/16" (1-1/8" to 2-1/2")

I have a Semco slider with a polished brass handle and would like to change it to oil rubbed bronze finish. I have attached a photos below but the screw spacing looks to be 3-15/16. The door is 1-3/4 thick. Thanks in advance!

I looking for the lock and latch lever for jeld-wen patio door. Thank you.

Door Handle - space between holes = 4.0"

Hi, looking for a replacement handle for a JW glass sliding door

The locking handle of my sliding door broke . The double mortice lock works fine but the flat pin inside has broken . The brass locking lever i have also.

Hello, I looking for a Sliding door handle from Traco. Have attached picture for reference. I only need to replace the back side. The length of the handle bar is 10 inch, I open to suggestions too. Thanks Jay

Hello - I'm looking for a replacement outdoor handle for my sliding glass door. Handle is from Imperial USA and says Keynetic on the inside. I believe it to be the "Sonoma" model and it only has the thumb lock - no outside key lock. The door thickness is 1 3/4" and the cross hole spacing is 3 15/16" ... (cont.)

Can you please help identify a replacement for this brass colored thumb latch for a sliding glass door. I am buying the condo and do t yet have access and one of the slider latches does not work and The latch needs to be replaced (or repaired) Thanks!

Also looking for the same finish. Thank you!

I need a new latch for my integrity patio door as my is loose

Need to replace the lock/handle set pictured

Hello, We have a 23 year old home and would like to replace the door handles on 2 sliding doors. They were brass (we removed and spray painted), but the spray paint is not lasting. We would like to find a replacement. Thank you!

Want to replace this brass lock with same but in satin nickel finish. Found on your website part #82-087 which appears to be the same as the lock in my photos provided. However, our door slides left to right so that you grip it on the right vs. left. So it's reversed from the photo shown in #82-087 ... (cont.)

Hello. I am in need of a replacement lock switch for my dual-slide patio door lock. The part in question is, obviously, the piece I am holding in my hand. It is the actual lock switch. It simply snapped off after several years of use. All other parts of the lock system works fine. Is this part ... (cont.)

Please help me identify the replacement parts (hopefully in white). Thank you

I need the interior latch that locks the door from the inside

Hello, I have a 12' wide x 8' high patio door, wood interior/alum exterior and the exterior handle has broken away from the right hand plate on the top. Am hoping that you can identify for me so I can order a replacement. There are no numbers on the hardware itself but I do have the hardware install ... (cont.)

Hello, I think your 82-090 item fits the same dimensions as my current handles except my lock lever is located toward the top area of the door handle (my images attached). The images posted for the 82-090 item have the lock lever toward the bottom of the handle. Do you have a door handle that has th ... (cont.)

Sliding door handles and lock mechanism I need these parts

Would the 82-265 and 82-086 be the correct replacement hardware?