Viewing all customer Discussions for:

90-180 Window Sash Lock, 2-1/4"

Hello, Please, kindly help identify the appropriate replacement for the Latch in the picture. There are no labels or markings on the window to indicate the manufacturer. Latch measures 2 1/2 x 9/16 without the tip 2 9/16 X 9/16 with tip Thanks a lot

Back set: 5/8 Center hole to back: 3/8 Center Hole to center hole: 2 3/16 White

Missing the catch. Would like a new set please. The swivel lock is 2 3/4 wide x 1" deep Me a The catch is 2 7/8 wide x 1/4".

I need 2 Alcan window balancers: 18" long, 5/8"deep, 9/16"wide, with bottom shoe 15-029, top 19-005. And 3 locksets 90-180.

I am looking for the part number for window closers. They are Simonton pro builder series windows. See attached pic for sticker information. We would like to order quantity 10. Thank you.

Can I get a replacement lock for the lock shown in the first picture? Says "Alumax". There is a catch on each side of the upper window sash that prevents either window from opening more than about 4" (shown in the second picture). Can I get replacements for these? The upper sash drops as soon as the ... (cont.)

I can't find ID on window. Est 2016 install. 2 1/4" between screws and about 3/8" from screw to back of plastic latch.

I have some older ALCAN windows that I think are called sash style. The top window is stationary & the bottom window slides up over the top. Most of the locks need to be replaced. The look very similar to your 90-180 but brown with 2 1/4 hole spacing. The keeper mounts a little different than your 9 ... (cont.)

The latches shown in these two pictures do not catch. Maybe the windows have warped enough that the sweep is not long enough to catch. Do you have any ideas? The sliders are double sliders. I ordered the 90-180 and the 90-183 keeper, but they are exactly what I already have that doesn't work. You ... (cont.)

Hi, my coil balance is broken and I need to know what part to replace it with. Can you please help?

I would like to order five sets of the right track that's five different windows with the same track. That would be 10 track

I am in need of (2) ALCAN 2930 and (8) 3620 Channel Balances - from 1990 Alcan windows. I am also in need of the snap in glazing. The glazing measures 9/16 (instead of the 7/16 that the 55-092 shows) and is 7/32 the same as the 55-092. Additionally, the window locks are 2 3/4 inch (2 1/4 inch center ... (cont.)

Screw holes on locks and keepers are each 2 1/4" center-center. Underside of lock body has raised "1527". Top of lock body has raised "LOCK". Underside of lock cam has raised "1490". Underside of keeper has raised "1513". Lock body and keeper are each 2 7/8" long. Thanks, David N. Mann, PS My ... (cont.)

Need a replacement to this top latch. Pretty common system in NW houses. This is from a house built in 1997. Milgard no longer sells the pieces. I am open to just using another system.

Can you please tell me the replacement sash locks and associated hardware (screws) to replace these dual locks for a full sized window (30" x 53 1/2") that is inside of a shower. The dual sash locks and hardware have to be able to withstand water. The pictures are attached w/ a ruler for scale - the ... (cont.)

Selling house and need to "tune-up" windows. Attached are pics of the lock and keeper, as well as tilt latch. I am looking for 12 left and 12 right for each to replace. I am also looking for fin pile weather stripping. If available, how is it packaged? House was built in 1995. Windows are new con ... (cont.)

I need 4 of these locks. They are stamped with 680105. The Hole to hole measurement is 2 1/4" width and 3/8" from the front. I have already purchased and tried the 90-161 locks and the keepers are too tall and the throw is too deep. Thank you!

Aluminum window sweep lock or sash

Non-Impact Double Hung Window 51.87x61.75 Balancers have broken and I am not sure of the weight I would need to order for him. His sash lock seems to be loose as well and I want to order one of those as well.

I am looking at replacement sweep lock and keepers for Norandex windows. Looks like part number 90-300, but it says out of stock. Maybe just the keeper part number 90-301