Viewing all customer Discussions for:

16-035A Take Out Clip

This clip is used on certainteed windows installed in 1998. We could use at least a dozen of these because they are all brittle and breaking.

What are these called that you flip open when you're reinstalling the window balances? Do you sell replacements?thanks!

clip releases window so you can push to one side and remove for cleaning. You have to pull it out to activate the release. Then when done push back flush on window sash frame. two for each window

Hi, I'm looking for the side rail latch where I have to clip out the latches on both sides to allow the window to come out for cleaning. One of my latches tip broke and is no longer able to install the window back on. Please assist me in finding the part. Thank you, Paul

Channels are 5/8" wide and 31 3/4" long. It is stamped with "31 6". Any assistance helping me find the right part is most appreciated.

channel balance is stamped 19 6 351 PA. the metal piece is actually 19 1/2 long.

I need two sash clips

I am looking to get an estimate to replace two window channels, the second in another email. Please contact me if you need more info as I have additional photos.

The markings appear to say 19 3 bsi rg

Having trouble identifying

Metal channel of balancer length is 25.5 inches. The clip became disengaged from the hole on the inside track of window frame and snapped down to the foot position of the balancer. I don't know if it's possible to pull it back up to the top of the balancer, reattach it to the clip hole on the insi ... (cont.)

I need Vinyl window, Single Hung balance clip... originally on an Insulate Window. Sunshine Glass Co Customer # 502508

the metal portion of the channel is 35.5 and the full length with top and bottom fittings is 37". we probably need 6-8 so we have additional ones on hand. The stamp is 35 5 in addition we will need like 10 of the little stopper things that allow you to take off balancers and remove the windows th ... (cont.)

Hello, I have a window with a missing balance (I believe channel). Can you help me identify which part is needed? I recently removed the entire window and there aren't any identifiable numbers or other markers.

Metal channel length: 25 5/8 Stamp: 25 5 BSI PC Manufacturer: unknown Count needed: 2 Also need: - part 16-035A (10) - also nylon part inside top of pane channel shown in attached picture. It measures 2 1/4" long, 5/8" wide, the top inside portion is 3/4" long with a notch.

would like to see if there is a replacement for the white vinyl clip that pops out and allows the spring bar to catch and then release the window from the casement. Thank you

I need 2 of these block and tackles for a Insulate window and some take out clips. Can you please tell me the part numbers to order? Thanks, Lynn

I need new balance for 19 yr old window. I can't see any numbers on the metal piece. What else do you need? Jennifer

It says BSI 25-3 on it. The aluminum is 25 5/8 in length, 27 inches total

Hello, I am looking for the following window balance, guides, and take out clips. Please advise if you have these items available. I will need two sets as I have two windows that are missing these parts. The sash is 9 pounds. The visible glass height is 12 3/4". 01-32011-4 (for the balance) 01 ... (cont.)