Viewing all customer Discussions for:

16-035A Take Out Clip

Insulate vinal windows. This is the clip inside the window frame that you open to hook the spring to remove the window. I also need the plastic hooks that let you remove the screens.

The length is 12 3/8". It is stamped with 12 2 BSI. They were made about 20 years ago. I don't know the manufacturer. I meed 3 but could use 4 of them. I also wouldn't mind putting a few aside if it isn't cost prohibitive. I also included the installation clip photo. I need 6 of those as we ... (cont.)

Aloha, I have 2, 19 year old windows and the channel balances are old, worn and basically slipped out of the track, ut the springs are so tight and rusting, and I need to identify the correct part. The metal channel is 19" long, the ends are winged. The only stamp I see on the channel is 19 ... (cont.)

I have 4 double hung windows where the balance falls out when the window is opened or closed. I have attached photos. The length of the rod is 19 and 1/4 inches. I also need 4 take-out clips. The original ones are plastic and the edge that is to hold the balance for window removal has cracked off so ... (cont.)

window says it is a GAF, like the roofing materials. The window does not have metal extraction clips or holes for clips. I don't know what the square pieces plastic pieces are for. I need 2 new window balances.

I need two window clips.

Hi. I have some older Insulate brand windows that are malfunctioning. The channels (metal part only) measure just over 13 5/8" long. Marking on the back is: 13 2 B.S.I. PK. Takeout clips are all broken, takeout clip mounting slot in frame measures 1" x 3/16". I need hardware for 2 (same size) win ... (cont.)

Vynil window take out clips

Hi Can you help me identify the parts in the attached photo. Customer says they are Plygem parts.

The 2008 house I am working on has 4 Insulate (Ply Gem) double hung windows, approximately 30" x 50", with broken clips on the inside track. The clips are required to install the spring mechanism that holds the window up when open. Can these clips be replaced? Also, one of the spring mechanisms is m ... (cont.)

(No content.)

I have rented a house with windows that slide up and down. I'm not sure if that is what is called double-hung style. The label on the latch hardware on top is "certainteed". One window which is 14" high (outer dim. of height) is missing ALL hardware that keeps in place. The design is such that the f ... (cont.)

"19 5 B.S.1 PA" Metal channel measures 19 5/8" long, 1/2" wide. Unknown manufacturer but it was built in 2003 or 2004? I need 4 balances and a few of the plastic take out clips (see photo). Thank you, Travis

Hoping you can help as I had no idea there were so many different options and parts. A tenant notified me a window was opening/closing properly. After removing the sash it looks like the top guide on the left side is broken. I'd like to replace the top guide, and while I'm at it replace the balances ... (cont.)

hi, I have this window and it was in pieces. The sash and channel balances were out. They seem to be functioning. OK, I'm able to pull on the little part and it retracts OK, a little better after cleaning. But I don't have any take out clips, I think that's the only thing I need. If you could take a ... (cont.)

I'm currently trying to replace two window balancers from vandalism with a previous occupant of my property. The manufacturer from what I can tell online is Anderson but the only mark on the sticker says series: 200sh. Are these windows Anderson? Can I replace the window balancer if they cut the co ... (cont.)

Do you carry these plugs?

Length 36" Stamp: 35 4 B.S.I 4 channel's needed

These are the pics I have. There are pics of the info that is stamped on the channel. The bottom has a built in pulley on the bottom with small flanges protruding out. I can get different/better pics but this is what I was sent. I couldn't find anything to match but hopefully you'll have better l ... (cont.)

Hello, I tried to submit a picture and a post but for some reason it was flagged as spam and wouldn't let me send. I'm looking for a clip that is part of a window. It is missing on one side. Had a window specialist come by and basically he just said that I need to replace the clip that was missing. ... (cont.)