Viewing all customer Discussions for:

62-014B Rivet

This is a plastic casing for operator with the letters GU I only see 39-188 but my bar is 5 3/8 long . Will it still work. I know I'll have to drill new holes into frame to secure

Window will crank out most times but on the return it comes in slightly and then the handle spins. The only indicator of manufacturer is the locking bracket which says TRUTH. I need a new handle, gear assembly and arm

Looking for help finding the correct replacement I didn't see one with the correct arm length any help would be greatly approved.

Hi, I have a broken crank mechanism and not sure what I need. I have attached a photo. Please let me know. Thanks.

It looks like your product 39-315 is close to what I need. Except where your top bar measures 5" mine is 4.5". Will that work for me? Or do you have a similar product that will. I included a tape measure in these pictures for better reference. Thanks again for the help.

It looks like your Product Code: 39-172 is similar to what I'm looking for. Except for where your part measures 5", the part I have measures 4", marked as part B in my photos. Do you have one that measures 4"? Thanks for the help.

Hi! I need a new window dyad and was hoping you could tell me which one to get. The brown straight bar says 40395 and the white part that attaches to the arm crank says 30615 and 30894. Thank you!

I need two crankout

Looking for a replacement (both left and right handed) for this. It is stamped Truth and also has a number stamped 45251. The cover appears to be permanently attached and is 4 inches accross

can get away with the actual crank and the one arm that comes off it if sold that way? also need the bracket that keeps the lock rod in place.

These are photos of the left side window crank but it is the right side that will not open. I would like to replace both the right and left window operators. On the top arm is the letter B. On the bottom arm it says Truth 31512. I would appreciate any assistance in identifying these so I can replace ... (cont.)

Need to replace top and bottom's due to corrosion.

These are old but window is in good shape. Please help with the assembly and part

I'm looking to replace two casement window cranks. They crank in opposite directions. I'm having difficulty finding the right size. Thank you, Peter

I have a similar casement operator to the 39-188 5", but mine has a 4.5 " bar, with 5" screw hole spacing, is there a model that will fit or a modification i could make

Hi, I bought a "Sash Dyad Crank, 5" a few days ago. Order number 3033460When I compared it with existing parts, I realized that it is too long. See the photo attached. Looks like the existing part's arm length is 4.5". Do you have that part available? Thanks. Harvey

I have a 4 inch arm similar to 5 inch arm in part number 39-187.

I will need some of these mounts to repair windows from late 70s

The right handle has become worn and bent preventing the window from opening. I bent the part back but after some use it again isn't opening and closing. Need to replace the handle. Can you recommend a part number?

Should have done this first. Arm labeled B looks to be too long, it hits window frame when trying to close. Arm labeled A is longer, but that would probably only affect the amount of how far the window open, (not an issue). Any help appreciated. Thanks, K