Viewing all customer Discussions for:

15-014 Balance knife lock Shoe

Hi, I need to replace the channel balances on several Rivco windows. I've identified them as 751 because they are tilt out, ribbed and have a 15-014 balance knife lock shoe. They are all stamped with 28 but they measure 29 inches. The upper sashes weigh18 lbs. The lower sashes weigh 22 lbs ... (cont.)

Hi, I have to replace the channel balances in a 30 year old,double-hung window with wood sash and double glazing. There is no manufacturer name on the window. The balance are ribbed type with a shoe that looks like your 15-014 shoe. The only mark on the balance is "20" stamped on the face of t ... (cont.)

I have older Coradco windows that drop so I'm looking to replace the balances. The only marking/number I can find is 20, I've attached a picture. The knife lock shoes are the same as your 15-014's. I pulled the balance out. It is identical to the S751 ribbed series. It is 21" long so I assume I ... (cont.)

Hello, I have a service call on replacing 43 insulated glass panels on some Hurd aluminum clad double hung wood windows. I believe they are the pre 2004 jambliners, no tilt latch on sash. What I need are the friction shoes, that's your # 15-014. Those I just ordered from you. What I also need ... (cont.)

I have a customer that has wood double hung tilt sash, with jamb liners. the windows will not stay up. You unlock them the top sash slides down, lift up bottom sash it will slide down. Series 751 Chanel balances are ribbed with 15-014, shoe attached. Tan Window size is 34 x 58. Sash size is t ... (cont.)

We have window balances that need replacement. We have various stamps on the channels for various windows such as 27HD, 27HDQ but the windows sizes we have double hung wood ones that are 27"w x 30"H and 33"w x 30"H. Can we order the same for both windows or is size and weight part of the proper win ... (cont.)

I have several of these windows where the channel balance knife shoe (part 15-014)has broken. On a couple of them both sides are broken and the top portion of the window falls down unless the window is latched closed. Do I need to replace the channel balances (19") on these windows or can I just rep ... (cont.)

My house was built in 1980 and several of the clutches (I don't know if that is a correct term) and spring (balances) need replaced. I can't find these parts anywhere. Many of the window are similar to old Marvin windows (such as mouse trap latch, spring screen parts etc), but I can't find the piece ... (cont.)

Can my double hung windows be fixed if the cord has broken on the balance knife lock shoe? I have this shoe #15-014.

I'm replacing the channel balances in several double-hung windows. It seems odd that the channel balance for the upper sash is the same as the lower sash because the lower sash stretches the spring so much more. The part number stamped on each is W 28HD and is for a tilt window. If I replace all ... (cont.)

I have tilt in windows, and need to replace 2 ribbed, channel set balances (they have shoe 15-014 attached). They are stamped with 22D (left side) and 22P (right side). I do not see these on this page. Do you have them in stock? I am looking at the S751-23 Thanks, Joe